Multilayer ceramic capacitors (MLCC) are essential components for determining the reliability of electronic components in terms of time to failure. It is known that the reliability of MLCCs depends on their composition, processing, and operating conditions. In this present work, we analyzed the lifetime of three similar X7R type MLCCs based on BaTiO3 by conducting High Accelerated Life Tests (HALT) at temperatures up to 200 °C at 400 V and 600 V. The results were adjusted to an Arrhenius equation, which is a function of the activation energy (Ea) and a voltage stress exponent (n), in order to predict their time to failure. The values of Ea are in the range of 1–1.45 eV, which has been reported for the thermal failure and dielectric wear out of BaTiO3-based dielectric capacitors. The stress voltage exponent value was in the range of 4–5. Although the Ea can be associated with a failure mechanism, n only gives an indication of the effect of voltage in the tests. It was possible to associate those values with each type of tested MLCC so that their expected life could be estimated in the range of 400–600 V.
The thermal expansion coefficients for natural troilite, FeS, Ni-rich pyrrhotite, Fe0.84Ni0.11S, and Ni-poor pyrrhotite, Fe0.87Ni0.02S, were measured during cooling by in situ neutron powder diffraction over the temperature range 873–373 K. Between 873 and 573 K, the mean thermal expansion coefficients for the three compositions are 7.4(3)×10−5{FeS}, 8.0(4)×10−5{Fe0.84Ni0.11S} and 8.5(4)×10−5K−1{Fe0.87Ni0.02S}. Below 573 down to 373 K, the first two increase considerably to 14.1(7)×10−5{FeS} and 9.3(5)×10−5{Fe0.84Ni0.11S} while the latter sample shows no significant variation, 8.4(5)×10−5K−1. Below 573 K, the thermal expansion is highly anisotropic, with Δa/100 K−1ranging from 0.89(9)% {FeS} to 0.48(12)% {Fe0.87Ni0.02S} while Δc/100 K−1ranges from −0.39(11)% {FeS} to −0.13(2)% {Fe0.87Ni0.02S}.Upon cooling through 573 K, troilite and pyrrhotite undergo a transition where the FeS6octahedra distort and in the case of pyrrhotite, cation-vacancy clustering occurs. The thermal expansion coefficients are bigger for low cation-vacancy concentrations and decrease as the pyrrhotites become less stoichiometric. This indicates that the thermal expansion in these minerals is damped by vacancy ordering or clustering. The thermal expansion coefficients for troilite and pyrrhotite are amongst the largest reported for sulphide minerals and their role in the formation of ore textures is discussed briefly.