11 September 2024 in IEEE Transactions on Instrumentation and Measurement
Silicon carbide based metal-oxide-semiconductor field-effect transistors (MOSFETs) generate large amounts of heat because of their small size and increasingly high power density. The junction temperature is the most important index for evaluation of the reliability of these devices. This article proposes a method to study the changes in the forward voltage across the drain (D)-source (S) junction ( VDS ) under various test conditions from the perspectives of temperature sensitivity, stability, repeatability and anti-interference properties, with the aim of determining suitable temperature test conditions for SiC MOSFET chips to achieve precise device temperature measurements. The accuracy of the proposed measurement method is verified via comparison with an infrared thermal imaging method and an electrical method. The obtained results show that the error in the thermal resistance ( RTH ) repeatability measurements of SiC MOSFET modules is less than 3%. And the error in the SiC MOSFET junction temperature ( Tj ) measurements when compared with the infrared method is around 1%.
1 June 2026 in IEEE Transactions on Device and Materials Reliability
Bond wire failure is the dominant failure mode in TO (transistor outline) packaged SiC (silicon carbide) power MOSFETs (metal oxide semiconductor field effect transistors) but there is a lack of understanding about the degradation process. To fill in the knowledge gap, it is necessary to quantify the degradation before the final lift-off or breakage, from external measurements without resorting to scanning microscopy or decapsulation. This paper reports such a study by monitoring the change of device resistance during power cycling (PC). The effect of gate threshold voltage drift can be compensated but is found to be small for the samples selected, and the resistance measurement is used to indicate the gradual development of the foot heel crack. The stresses in two different types of discrete SiC power MOSFETs are compared. The study leads to an experimental procedure of extracting the lifetime model for system design and operational management.