14 August 2019 in IEEE Transactions on Industrial Informatics
Much recently, an internal model approach from output regulation theory has been adopted to solve the speed tracking control problem of permanent magnet synchronous motor (PMSM) system on simulation level. A striking advantage of this approach is that it can achieve multiple goals including trajectory tracking, disturbance rejection and robustness simultaneously. This paper further studies a position tracking control problem of PMSM system under nonlinear load torque disturbance. A nonlinear internal model based output feedback controller is proposed, which can achieve exact position tracking and allow certain parameter uncertainties. Besides simulation results, a real-time experimental setup is built and experimental results are provided to illustrate the effectiveness of the proposed controller. It is worth mentioning that the proposed controller can lead to a high precision position tracking performance under nonlinear load torque disturbance.
27 February 2024 in Intelligent Service Robotics
1 January 2017 in AIP Conference Proceedings
Interdigital capacitive sensors are applied in nondestructive testing and material property characterization of low-conductivity materials. The sensor performance is typically described based on the penetration depth of the electric field into the sample material, the sensor signal strength and its sensitivity. These factors all depend on the geometry and material properties of the sensor and sample. In this paper, a detailed analysis is provided, through finite element simulations, of the ways in which the sensor’s geometrical parameters affect its performance. The geometrical parameters include the number of digits forming the interdigital electrodes and the ratio of digit width to their separation. In addition, the influence of the presence or absence of a metal backplane on the sample is analyzed. Further, the effects of sensor substrate thickness and material on signal strength are studied. The results of the analysis show that it is necessary to take into account a trade-off between the desired sensitivity and penetration depth when designing the sensor. Parametric equations are presented to assist the sensor designer or nondestructive evaluation specialist in optimizing the design of a capacitive sensor.
1 July 2021 in Control Engineering Practice
6 June 2021 in Neural Computing and Applications
15 August 2019 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
Over the past few decades, the nonlinear output regulation (NOR) theory has attracted extensive attentions in control society. However, few experimental results have been reported about the NOR theory. This article first presents experimental results on discrete-time NOR problem for a linear motor driven inverted pendulum (LMDIP) system. To solve this problem, it is essential to find the solution of the complicated discrete regulator equations (DREs). Moreover, the friction force commonly exists in mechanical systems and cannot be neglected for control systems requiring high precision tracking performance. We present a novel discrete-time controller by combining neural network (NN) approach and friction-feedforward compensation mechanism. Finally, we verify the proposed control algorithm by experiment and make some comparisons with the linear controller.