Serkan Erdem

Serkan Erdem

Auto-generated profile, based on publicly available information

Serkan Erdem

Firat University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2024 in Materialwissenschaft und Werkstofftechnik
Verified
Journal Article
Closed access
CDC. Dogan
C. Dogan
MKMete Onur Kaman
Mete Onur Kaman
SES. Erdem
S. Erdem
MAMustafa Albayrak
Mustafa Albayrak

1 October 2021 in Materials Testing
Verified
Journal Article
Closed access
SESerkan Erdem
Serkan Erdem
MGMustafa Gur
Mustafa Gur
MKMete Onur Kaman
Mete Onur Kaman
In this study, first circular hole layered hybrid composite plates were repaired by wet patch method, and then buckling behavior was investigated experimentally and numerically. In the experimental study, composite plates were produced by vacuum infusion method using hybrid fabrics made of carbon and aramid. Circular holes were drilled in the produced plates and then these holes were repaired with the same material. In the wet patch repair method, wet hybrid fabrics impregnated with epoxy resin were placed around the hole and then this area was subjected to pressure and temperature by vacuum infusion method. In experimental tests, pressure force was applied to the fixed sides and force-displacement graphs were obtained. In a numerical study, non-linear buckling analysis was performed by creating numerical models of plates and patches using the finite element method. As a result, experimental and numerical load-displacement graphs were obtained in accordance with pre- and post-buckling. Thanks to the repair in accordance with practical applications, no interface debonding damage occurred in ideal samples. Increasing the patch length from 30 mm to 40 mm increased the maximum damage load by 6 %, while increasing the patch length to 50 mm increased damage load by 12 %. Increasing the patch thickness from 0.65 mm to 1.1 mm increased the load by 67 %, while increasing it to 2.16 mm increased the load to 247 %. Fiber orientation was found to be a more influencing factor in critical buckling and damage load than the ply sequence.

7 September 2023 in Computer Methods in Biomechanics and Biomedical Engineering
Verified
Journal Article
Closed access
MEMehmet Eskibağlar
Mehmet Eskibağlar
SESerkan Erdem
Serkan Erdem
MKMete Onur Kaman
Mete Onur Kaman
The aim of this study was to evaluate the stress induced by clamps made of different materials on mandibular first molar teeth using finite element analysis. The tooth model to be used in the study was created using micro-CT scanner and the rubber dam clamp model was created in three dimensions (3D) using Solidworks and applied to a finite element tooth model of an intact mandibular first molar. The size of the clamp opening and the force to be applied were calculated according to the buccolingual distances of the tooth. The contact areas of the clamps on the tooth were determined and subjected to force. The stress distribution patterns and maximum von Mises stresses were calculated and compared against these forces. The most stress against these forces occurred in the enamel tissue on the distal side where the clamp was in contact with the tooth. The stress value in the stainless steel clamp (191.63 MPa) was approximately 85% higher than the clamp made of polyethylene ketone (103.85 MPa). The stress in the dentin and pulp tissue of the tooth was negligible. Clinicians should examine the enamel tissue below the equatorial line of the tooth in detail before clamp application. The forces exerted by stainless steel clamps can cause damage to the enamel tissue of the tooth or progression of an existing enamel crack.

22 August 2023 in Materials Testing
Verified
Journal Article
Open access
PDF file
MEMehmet Eskibağlar
Mehmet Eskibağlar
SESerkan Erdem
Serkan Erdem
MKMete Onur Kaman
Mete Onur Kaman
MOMevlüt Sinan Ocak
Mevlüt Sinan Ocak
The aim of this study was to evaluate the performance of two endodontic rotary files with different off-center geometries in bending and torsional tests using finite element analysis (FEA). Trunatomy Prime (TRN-P) and WaveOne Gold Primary (WOG-P) files were used in the study. Geometric models for finite element analysis were obtained by micro-computed tomography scanning. FEA analyses were performed according to ISO 3630-1 specifications to evaluate the bending and torsional tests of the files. Trunatomy Prime showed higher flexibility than WOG-P when subjected to bending. In terms of torsional strength, WOG-P showed higher torsional strength than TRN-P. The geometry of a rotary instrument file influences the mechanical behavior (bending and torsion) of rotary files. The clinician should be aware of the behavioral differences in rotary files and use the appropriate file according to the clinical situation in addition to the manufacturer’s instructions.

1 September 2021 in Materials Testing
Verified
Journal Article
Closed access
SESerkan Erdem
Serkan Erdem
MGMustafa Gur
Mustafa Gur
MKMete Onur Kaman
Mete Onur Kaman
In this study, the effect of change of notch type on non-linear buckling behavior in composite plates was investigated experimentally and numerically. The composite plate is produced by applying the vacuum infusion method using carbon and aramid hybrid woven fabric and epoxy. Primarily, in the composite plates, a circular hole in the middle, a U single edge notch and semicircle double edge notches are formed. The specimens were subjected to buckling tests, being placed on their two edges, while the others were free. Afterwards, the load displacement graphs of the plates under pressure load were obtained experimentally for the behavior before and after buckling. In the numerical study, non-linear buckling analysis was performed using the finite element method. As a result, experimental and numerical buckling behaviors were obtained in accordance with each other. Since the net cross section bearing the pressure load is equal for all notch types, an effective difference between the maximum damage loads has not been achieved. So, the variation of notch type does not change the load displacement behavior characteristics of the plates after buckling. However, due to the unsymmetrical geometry in U notched plates, an uneven change in horizontal displacements along the width of the plate was achieved. The maximum stress concentration formed around the notch increased after buckling with the increase of displacement in vertical direction.

29 October 2018 in Bio-Medical Materials and Engineering
Verified
Journal Article
Closed access
PDF file
SESerkan Erdem
Serkan Erdem
MGMustafa Gür
Mustafa Gür
MKMete Onur Kaman
Mete Onur Kaman
BACKGROUND: Various techniques have been developed in the treatment of fractures. One of these techniques is the internal fixation, which has an important place in practice. OBJECTIVE: In this study, fractured tibia bone has been treated with implant