6 August 2021 in IEEE Transactions on Vehicular Technology
Intelligent reflecting surface (IRS) has recently emerged as a promising technology for 6 G wireless systems, due to its capability to reconfigure the wireless propagation environment. In this paper, we investigate a Rate-Splitting Multiple Access (RSMA) for IRS-assisted downlink system, where the base station (BS) communicates with single-antenna users with the help of an IRS. RSMA relies on rate-splitting (RS) at the BS and successive interference cancellation (SIC) at the users and provides a generalized multiple access framework. We derive a new architecture called IRS-RS that leverages the interplay between RS and IRS. For performance analysis, we utilize an on-off control technique to control the passive beamforming vector of the IRS-RS and derive the closed-form expressions for outage probability of cell-edge users and near users. Moreover, we also analyze the outage behavior of cell-edge users for a sufficiently large number of reflecting elements. Additionally, we also analyze the outage performance of cooperative RS based decode-and-forward (DF)-assisted framework called DF-RS. Through simulation results, it is shown that the proposed framework outperforms the corresponding DF-RS, RS without IRS and IRS-assisted conventional non-orthogonal multiple access (NOMA) schemes. Furthermore, the impact of various system's parameters such as the number of IRS reflecting elements and the number of users on the system performance is revealed.
19 April 2022 in IEEE Transactions on Intelligent Vehicles
Rate-splitting multiple access (RSMA) has emerged as a novel generalized multiple access technology which can control the interference in multi-user communication systems. Reconfigurable intelligent surface (RIS) has also been proven to improve the spectral efficiency in the next-generation (beyond 5G (B5G) and 6G) wireless communication networks. Thus, in this paper, we explore the RSMA scheme for RIS-enabled unmanned aerial vehicle (UAV) based multi-user vehicular communication network in the presence of co-channel interference. The communication between the UAV and the desired vehicle takes place through an RIS along with the direct link and is interfered by multiple interfering vehicles operating in the same spectrum. After deriving the approximate cumulative distribution function (CDF) of common and private stream signal-to-interference-plus-noise ratios (SINRs) at the desired vehicle in the interference limited scenario, we obtain an expression for the average outage probability (AOP) over the complete flying duration of the UAV. Furthermore, the optimum RSMA power allocation coefficients in each time slot of UAV flight duration are obtained by minimizing the Sum-AOP over all the desired vehicles. The performance of the proposed RSMA based RIS-aided vehicular communication network is compared with (a) RSMA based network without RIS and (b) non-orthogonal multiple access (NOMA) based RIS-aided counterpart. The numerical results reveal the superiority of RSMA over NOMA and the significance of deploying RIS in considered vehicular communication network. The analytical results are corroborated with Monte Carlo simulations.
18 May 2023 in IEEE Transactions on Communications
In this paper, we explore the use of reconfigurable intelligent surface (RIS) in unmanned aerial vehicle (UAV) based multiuser downlink communications, where a flying UAV serves multiple single antenna users through multiple RISs mounted on various buildings. More specifically, we consider the selection of RISs based on the outdated and imperfect channel state information (CSI) of the composite UAV-RIS-User channels at the UAV. After selection process, the UAV communicates to the user via the selected RISs and also with the direct link. Particularly, we derive an infinite series based expression for selection probability of RISs under both the outdated and imperfect CSI of composite channels based selection scheme. We also derive the statistical distribution of instantaneously received signal-to-noise ratio (SNR) under outdated and imperfect CSI conditions of both the direct and composite links at the user. Next, using the derived statistics, we analyze the network’s performance in terms of the average coverage probability (ACP) and average bit error rate (ABER) over the complete UAV flight time. Moreover, we discuss the behavior of ACP and ABER for very small and very large values of UAV transmit power, respectively. It is depicted through numerical results that selecting more RISs from a group of small-sized RISs may not be as advantageous as selecting fewer RISs from a group of large-sized RISs. Moreover, we also demonstrate the effect of several system parameters such as number of RIS reflecting elements, number of selected RISs, the severity of UAV-RIS and RIS-User links, and the severity of imperfect and outdated CSI on the network’s performance. The analytical results are corroborated with Monte-Carlo simulations.
2 November 2021 in IEEE Transactions on Intelligent Transportation Systems
Reconfigurable intelligent surface (RIS) has emerged as important transmission technology to improve the spectral/energy efficiency in the next-generation (beyond 5G (B5G) and 6G) wireless communication network and has numerous applications in the areas of Internet of Things (IoT) and vehicular communication systems. Thus, in this paper, we investigate the application of RIS in unmanned aerial vehicle (UAV) enabled vehicular communication system with infinite and finite block length codes, where UAV communicates with the single antenna ground vehicle in the presence of several interfering vehicles on the road. We have obtained the approximate closed-form statistics of received SINR at ground vehicle in the presence of multiple nonidentical interference links. Furthermore, we analyze the performance of the considered system in terms of the coverage probability, bit-error-rate, block error rate (BLER) and goodput. It has been shown through the numerical results that the deployment of RIS significantly improves the performance of UAV-enabled vehicular communication network, even in the presence of the direct link between the UAV and the ground vehicle. Additionally, we also investigate the impact of various channel and system parameters like practical reflection coefficients of RIS, number of RIS reflecting elements, and number of interfering vehicles on the system performance. The analytical results are corroborated with Monte Carlo simulations.
25 March 2022 in IEEE Transactions on Communications
Reconfigurable intelligent surface (RIS) has emerged as an important transmission technology for numerous applications in Internet of Things (IoT) systems. Thus, in this paper, we investigate the application of RIS in energy harvesting (EH) based unmanned aerial vehicle (UAV) communication network with finite block length (BL) codes, where a rotary wing type flying UAV communicates with the multiple single antenna IoT users with the aid of multiple RISs mounted on several skyscraper buildings. To transmit the signal to a particular IoT user, the UAV selects an RIS on the basis of either UAV-RIS (i.e., partial) or UAV-RIS-IoT (i.e., full) channel state information (CSI) and then transmits the signal through the selected RIS along with the direct link transmission. In particular, we derive (i) the expression for probability of RIS selection, (ii) the statistical distribution of instantaneously received information signal-to-noise ratio (SNR) at the IoT user. Based on the derived statistics, we analyze the performance of the considered system under finite BL codes in terms of the average outage probability, average block error rate (ABLER) and goodput averaged over entire flying duration. Moreover, the BLER performance with finite BL codes is also compared with the infinite BL codes scenario. Additionally, we also investigate the impact of various channel and system parameters like imperfect CSI, number of RISs and the number of reflecting elements at each RIS, location of IoT users, variable altitude of the UAV, and the severity of channel fading of UAV-RIS link on the system performance. Furthermore, we have obtained the optimum UAV location in each time slot which minimizes the ABLER per time slot over all the users in the network. The analytical results are corroborated with Monte Carlo simulations.
22 April 2022 in IEEE Transactions on Communications
Owing to the factors such as controllable mobility, ready-to-use technology, low cost, easy implementation, and so on, unmanned aerial vehicle (UAV) possesses tremendous potential to be one of the primary candidates for next-generation (6G) wireless networks. This paper presents a UAV-assisted multiuser communication network where a multiple antenna UAV base station (BS) serves multiple single antenna ground users (GUs). UAV-BS uses a laser source-based charging mechanism to fulfill its power requirement and applies simultaneous wireless information and power transfer (SWIPT) in the downlink in order to provide desired power to energy-constrained GUs. Also, a clustering-based hybrid multiple access technique is used that combines both orthogonal multiple access (OMA) and non-orthogonal multiple access (NOMA) signaling to transmit the information to all GUs, simultaneously. Due to the involved analytical complexity corresponding to the multiple antennas and users, we use a hybrid beamforming method for efficient communication. Next, we analyze the performance of the proposed framework in terms of user outage probabilities, their respective throughput, and average power harvested considering non-linear energy harvesting and derive expressions of these performance metrics. Moreover, we formulate an optimization problem where the throughput of one GU is maximized by optimally choosing the power allocation parameter while ensuring the desired target throughput at other GU in each cluster. We also illustrate how crucial is the optimal selection of the target rates to maximize the network performance. Simulation results are provided to validate the accuracy of derived expressions and to highlight the dominance of hybrid beamforming and hybrid NOMA compared to conventional methods on the performance of the considered network.