1 January 2024 in Bioactive Materials
Image-guided thermal ablation (TA), which is less invasive, has been widely applied for treating various kinds of tumors. However, TA still poses the potential risk of thermal damage to sensitive tissue nearby. Therefore, an adjunctive thermoprotective hydrodissection technique with constant injection of 5% glucose (5% Glu) has currently been adopted for clinical application, but this may be hazardous to humans. In this study, a multifunctional hyaluronic acid-based hydrogel (HA-Dc) was developed for hydrodissection. Compared with 5% Glu (the most clinically used solution) and the previously reported F127 hydrogel, the HA-Dc hydrogel was studied in vitro in a porcine liver model and in vivo in a rabbit model and showed good injectability and better tissue retention, stability, and thermoprotective properties throughout the TA procedure. Furthermore, in the preclinical evaluation in a Macaca fascicularis (M. fascicularis) model, HA-Dc showed excellent performance in terms of stricter neuroprotection compared with 5% Glu. In addition, the HA-Dc hydrogel with good biocompatibility and controllable degradation behavior in vivo could be a promising platform for thermal protection during clinical TA procedures.
1 September 2024 in Ultrasonography
Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions.Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃.Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05).Conclusion: The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.
8 July 2021 in Journal of Clinical Ultrasound
3 December 2020 in Journal of Ultrasound in Medicine
25 February 2026 in SSRN Electronic Journal
Phononic crystal (PnC) topology optimization for wide and low-frequency bandgaps is computationally demanding due to repeated finite element method (FEM) eigenvalue analyses. In this work, a surrogate-assisted optimization framework combining a convolutional neural network (CNN) with simulated annealing (SA) is developed to accelerate two-dimensional PnC design. The CNN surrogate directly predicts dispersion relations from discretized unit-cell configurations, enabling efficient bandgap evaluation without repeated FEM calculations during optimization.Using this framework, multiple PnC structures are independently optimized, each targeting a specific bandgap order. The surrogate-assisted optimization achieves optimized topologies consistent with FEM-based SA results while reducing the computational time per optimization run from several thousand minutes to approximately one minute. The surrogate model further demonstrates good generalization capability across different filling ratios and structural configurations. Overall, the proposed CNN–SA framework provides an efficient and scalable approach for inverse design of phononic crystals.