This work presents an output-capacitor-less digital-assisted analog low-dropout regulator digital-assisted analog LDO (DA-ALDO) that employs a seamless digital-to-analog transfer (D2A-TF) technique enabled by a local ground generator (LGG). The proposed architecture extracts only the strengths of digital LDOs (DLDOs)—fast transient response and low voltage droop—and analog LDOs (ALDOs)—high power supply rejection ratio (PSRR)—to achieve an optimized performance without inheriting their drawbacks. The proposed DA-ALDO is fabricated in a 28-nm CMOS process and achieves a PSRR of −57.6 and −53.7 dB at 10 kHz under load currents of 1 and 100 mA, respectively. It exhibits a voltage droop of only 54mV and a fast settling time of 667 ns in response to a 99-mA load step while consuming a quiescent current of $338.5~{\mu }$ A. The regulator occupies a compact active area of 0.032 mm2 and achieves a figure of merit (FoM) of 0.029 ps.
24 October 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
An area-efficient CMOS cross-coupled LC-VCO, operating from 5.74 GHz to 8.02 GHz and featuring a tail noise filter with two tail inductors integrated inside the main inductor, is presented for the first time. The tail noise filter comprised two nested intertwined tail inductors (NITIs) and a tail capacitor bank, effectively suppressing phase noise (PN) while generating negligible magnetic couplings between the main inductor and the NITIs. The proposed architecture enables area-efficient CMOS cross-coupled design, even with the two NITIs, but has no performance degradation, i.e., it eliminates the additional area for the tail noise filter. Implemented in 28-nm CMOS process, it consumed 11 mA current from 0.73 V power supply. The LC-VCO achieved PN of −116.38 dBc/Hz at 1 MHz offset frequency for an output frequency of 5.747 GHz. 37% and 27% reductions in silicon area were achieved, over the conventional LC-VCO and an LC-VCO using intertwined tail inductors (ITIs), respectively, without compromising on performance. The proposed design has the smallest area among state-of-the-art LC-VCOs that include a tail noise filter along with competitive PN and frequency tuning range (FTR).
1 January 2026 in IEEE Solid-State Circuits Letters
This article presents an injection-locked clock multiplier (ILCM) achieving the low-reference spur (spur${}_{\mathrm {REF}}$ ) with minimal overhead of a calibrator. To remove the dominant sources of frequency error, which are frequency drift ($f_{\mathrm {DF}}$ ), phase offset ($\varPhi _{\mathrm {OS}}$ ), and injection-induced phase error ($\varPhi _{\mathrm {INJ}}$ ), the ILCM employs a compact and power-efficient calibrator that combines a sub-sampling frequency tracking loop (SSFTL) and an injection pulse timing calibrator (IPTC). The proposed calibrator eliminates $\varPhi _{\mathrm {INJ}}$ by adjusting the injection timing, simultaneously removing $f_{\mathrm {DF}}$ and $\varPhi _{\mathrm {OS}}$ . Furthermore, by leveraging the same signal for both injection and sampling, the proposed ILCM suppresses sampling-induced frequency modulation without requiring an isolation buffer and additional calibration circuit. Fabricated in a 28-nm CMOS, the ILCM achieves a spurREF of −81.36 dBc and an rms jitter of 280.9 fs at a 2.1-GHz output frequency.
1 January 2026 in IEEE Journal of Solid-State Circuits