One-step anti-solvent deposition methods are widely applied in inverted perovskite solar cells (PSCs). However, anti-solvent processed films typically exhibit a small grain size and abundant defects. Herein, we propose a facile passivation approach using an ultrathin poly(triarylamine) (PTAA) layer to passivate the interfacial and grain boundary defects. An energy band alignment is realized by introducing an ultrathin PTAA layer sandwiched between the perovskite layer and the poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) layer to suppress interfacial recombination and accelerate hole transfer. By optimum design of the PTAA layer, we fabricate PSCs with a power conversion efficiency (PCE) of 19.04%, a fill factor (FF) of 82.59% and a short-circuit current density (Jsc) of 21.38 mA cm−2. To the best of our knowledge, the obtained FF value is the maximum among those reported for inverted chlorine-doped methyl perovskite solar cells (PSCs). After storage under ambient conditions for 10 days, the PCE of the PSCs with PTAA modification is still maintained at the 80% level, indicating substantially improved stability. Our work provides an effective method to boost PSCs with enhanced efficiency and stability.
The electron transport layer (ETL) in perovskite photodetectors is playing a vital role in highly efficient electron extraction. Herein, this work reports a perovskite photodetector based on hydrothermal-fabricated ZnO nanorods (NRs) as the ETL and hot-injection-fabricated CsPbBr3 quantum dot (QD) as the photoabsorber. The crystalline structure, morphologies, and photoluminescence (PL) of the materials and the physics mechanism of highly efficient electron extraction in the devices are characterized and analyzed. The PL and time-resolved PL confirm the reduced recombination and enhanced electron transport to the indium tin oxide anode. The photodetectors based on ZnO NRs/CsPbBr3 QDs exhibit enormous enhancement in the response parameters such as a rise time of 12 ms, a decay time of 38 ms, and an on/off ratio of 3000, compared with the photodetectors based on ZnO films/CsPbBr3 QDs. These results indicate that the fabricated ZnO NRs/CsPbBr3 QDs heterojunction has a wide prospect of future applications in photodetectors.