Muhammad Furqan

Muhammad Furqan

Auto-generated profile, based on publicly available information

Muhammad Furqan

Institute for Communications Engineering and RF-Systems, Johannes Kepler University, 4040 Linz, Austria. They are now with Danube Integrated Circuit Engineering GmbH, 4040 Linz, Austria

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2017 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FAFaisal Ahmed
Faisal Ahmed
MFMuhammad Furqan
Muhammad Furqan
BHBernd Heinemann
Bernd Heinemann
ASAndreas Stelzer
Andreas Stelzer
We present a novel method of maximizing the output power and efficiency of millimeter-wave and terahertz signal sources, which are based on the push-push topology. In this method, the common-mode impedance of a differential Colpitts oscillator operating in the odd mode is maximized by introducing a fixed-valued capacitor (Cr) at the common-base node. This capacitor is designed to introduce a common-mode parallel resonance at the desired second harmonic, boosting the common-mode voltage swing and subsequently its output power. The proposed method is analyzed using a high-frequency even-mode π-model. Analytical expressions of input impedance are derived and are used for calculating the common-mode resonance frequency and the required value of Cr. Two 0.3-THz voltage-controlled oscillators (VCOs) are implemented in a 130-nm SiGe BiCMOS process. It is shown that by using the proposed technique, the output power is improved by more than 6 dB, as compared with the conventional approaches. The implemented VCOs work from 292 to 318 GHz and 305 to 327 GHz, delivering a peak output power of 0.6 and 0.2 dBm, with a dc-to-RF efficiency of 0.8% and 0.9%, and can achieve a phase noise of -108 and -105 dBc/Hz at 10-MHz offset, respectively. As compared with the prior state-of-the-art Si-based tunable signal sources and arrays working above 270 GHz, this paper shows the lowest phase noise and the best figure-of-merit, while having an excellent output power, a tuning range, and a dc-to-RF efficiency.

1 June 2017
Verified
Conference Paper
Closed access
MFMuhammad Furqan
Muhammad Furqan
FAFaisal Ahmed
Faisal Ahmed
KAKlaus Aufinger
Klaus Aufinger
ASAndreas Stelzer
Andreas Stelzer
This paper presents a fully-integrated D-band bistatic frequency-modulated continuous-wave radar transceiver (TRX) chip based on 130 nm SiGe BiCMOS technology. The TRX chip consists of an active IQ modulator and an IQ down-conversion mixer. It is based on a χ 6 frequency multiplier chain, with a 40-GHz frequency doubler and a 120-GHz frequency tripler. The IQ signals are generated by a capacitively loaded folded 90° hybrid coupler. The entire chip is optimized for wideband operation. The TRX chip and the circuit break-outs are characterized on wafer. The TRX chip demonstrates state-of-the-art performance with a peak output power of 11 dBm and a 3-dB bandwidth of 30 GHz. The on-chip receiver provides a measured conversion gain of around 15 dB and a simulated minimum noise figure of 8 dB, with a 1-dB input compression point of -7.5 dBm. The IQ receiver shows a good balanced behavior with an average amplitude imbalance of 0.5 dB and a phase variation from 93 ° to 98 ° throughout the 3-dB bandwidth. The chip consumes a total DC power of 825mW and has an area of 1.964 χ 1.964mm 2 .