Andreas Stelzer

Andreas Stelzer

Auto-generated profile, based on publicly available information

Andreas Stelzer

Institute for Communications Engineering and RF-Systems, Johannes Kepler University Linz, Linz, Austria

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MNMinh Q. Nguyen
Minh Q. Nguyen
RFReinhard Feger
Reinhard Feger
JBJonathan Bechter
Jonathan Bechter
MPMarkus Pichler-Scheder
Markus Pichler-Scheder
MHMartin H. Hahn
Martin H. Hahn
ASAndreas Stelzer
Andreas Stelzer
Frequency-division multiple-access (FDMA) in frequency-modulated continuous-wave (FMCW) radar comprises range-division multiple-access (RDMA) and Doppler-division multiple-access (DDMA). In this article, we present a method using RDMA and DDMA to realize multiple-input multiple-output (MIMO) functionality for FMCW radars. We use single-sideband modulation and quadrature phase shift keying (QPSK) modulation to implement RDMA and DDMA, respectively. These two approaches enable the simultaneous transmission of fast chirp waveforms from multiple transmitting (TX) antennas. Compared to existing works, our proposed system shows the following advantages. First, in RDMA FMCW radar, we apply overlapping binary masking to improve the unambiguous range. Second, in DDMA FMCW radar, we introduce a phase compensation method to reduce the image signals from the nonideality of QPSK symbols. Finally, we leverage these advantages of combining both RDMA and DDMA to balance the performance for FMCW MIMO radar in angular resolution, unambiguous range, and unambiguous velocity. In particular, the FMCW radar system combining RDMA and DDMA allows us to increase the numbers of TX antennas in MIMO applications. We verify our proposed radar system with measurement data on a prototype using three TX and four receiving antennas.

22 April 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MSMartin Scherhäufl
Martin Scherhäufl
FHFlorian Hammer
Florian Hammer
MPMarkus Pichler-Scheder
Markus Pichler-Scheder
CKChristian Kastl
Christian Kastl
ASAndreas Stelzer
Andreas Stelzer
In this article, a precise phase-based radar distance measurement system using a Viterbi decoder to resolve phase ambiguity is presented. Relying on the frequency-modulated continuous-wave radar principle, the introduced method evaluates both the frequency and the phase of the intermediate frequency signal, thus achieving absolute distance measurement with high accuracy. To avoid ambiguity in the distance estimates by half the wavelength of the radio frequency signal, which commonly arises due to 2 π ambiguity in the measurement of the phase, the proposed Viterbi-based method estimates the most likely sequence of distances between the radar front end and the target. To verify the system concept, measurements using a commercial 77 GHz radar module were carried out, whereby the contour of a predefined surface containing steps in the height profile had to be determined. The experimental results confirm that the Viterbi-based approach is suitable to resolve phase ambiguity since accurate and repeatable distance estimates were obtained.

20 September 2022 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Open access
CMChristoph Mangiavillano
Christoph Mangiavillano
AKAlexander Kaineder
Alexander Kaineder
KAKlaus Aufinger
Klaus Aufinger
ASAndreas Stelzer
Andreas Stelzer
Terahertz frequency-modulated continuous-wave (FMCW) radars operating close to and beyond $f_\text{max}$ often use gain-enhancing lenses to improve the signal-to-noise ratio. A compact single-chip transceiver benefits a lot from the alignment of the lens to the single on-chip antenna in a monostatic system. The typically required coupler for monostatic operation adds an insertion loss. The proposed multiply-by-24 frequency multiplier-based FMCW radar transceiver removes the coupler and integrates both the final 0.48-THz doubler and subharmonic downconverter into a single common collector push-push doubler. The common emitter is the only port at 0.48 THz in this monostatic system, feeding the top-metal on-chip patch antenna using a direct via stack. The 1.42- $\text{mm}^{2}$ monostatic FMCW radar transceiver, manufactured in a 90-nm SiGe BiCMOS technology with an $f_\text{T}$ / $f_\text{max}$ of 300/480 GHz consumes 85 mA when connected to a 3.3-V supply. At 0.48 THz, the output power is $-$ 12 dBm and the single-sideband noise figure is measured as 36.3 dB. FMCW radar measurements with operating bandwidths of up to 55 GHz, corresponding to a theoretical range resolution of 2.73 mm are performed using an on-board frequency source of a credit card-sized demonstrator.

20 August 2012 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZTZiqiang Tong
Ziqiang Tong
ASAndreas Stelzer
Andreas Stelzer
WMWolfgang Menzel
Wolfgang Menzel
This letter presents an analysis of the impedances of differential feed microstrip rectangular patch antennas. It is shown that the impedance of a differential feed antenna exhibits cosine squared behavior over the feed distance. We present improved expressions for calculating the impedance match feed positions of a differential feed rectangular microstrip patch antenna with given dimensions, on the base of which we designed two antenna prototypes. Both simulation and measurement results match our theoretical prediction.

1 June 2017
Verified
Conference Paper
Closed access
MFMuhammad Furqan
Muhammad Furqan
FAFaisal Ahmed
Faisal Ahmed
KAKlaus Aufinger
Klaus Aufinger
ASAndreas Stelzer
Andreas Stelzer
This paper presents a fully-integrated D-band bistatic frequency-modulated continuous-wave radar transceiver (TRX) chip based on 130 nm SiGe BiCMOS technology. The TRX chip consists of an active IQ modulator and an IQ down-conversion mixer. It is based on a χ 6 frequency multiplier chain, with a 40-GHz frequency doubler and a 120-GHz frequency tripler. The IQ signals are generated by a capacitively loaded folded 90° hybrid coupler. The entire chip is optimized for wideband operation. The TRX chip and the circuit break-outs are characterized on wafer. The TRX chip demonstrates state-of-the-art performance with a peak output power of 11 dBm and a 3-dB bandwidth of 30 GHz. The on-chip receiver provides a measured conversion gain of around 15 dB and a simulated minimum noise figure of 8 dB, with a 1-dB input compression point of -7.5 dBm. The IQ receiver shows a good balanced behavior with an average amplitude imbalance of 0.5 dB and a phase variation from 93 ° to 98 ° throughout the 3-dB bandwidth. The chip consumes a total DC power of 825mW and has an area of 1.964 χ 1.964mm 2 .

31 May 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
MNMinh Q. Nguyen
Minh Q. Nguyen
RFReinhard Feger
Reinhard Feger
TWThomas Wagner
Thomas Wagner
ASAndreas Stelzer
Andreas Stelzer
In this article, we investigate the feasibility of a high angular resolution method based on deep learning for estimating the angle of arrival (AoA) using an automotive frequency-modulated continuous-wave (FMCW) multiple-input multiple-output (MIMO) radar. The deep learning approach takes advantage of the 2-D signal structure from the range-Doppler (RD) maps to determine AoA of targets. To achieve this, we use a neural network architecture that is based on the frequency-representation module of the DeepFreq model. We call it FRNet12, since it uses 12 virtual antennas, which are derived from three transmit and four receive antennas using our FMCW MIMO radar. Furthermore, we propose a cascaded neural network system to further improve the performance of the FRNet12 model. This system consists of an extrapolation neural network (ETPNet) and FRNet18. The ETPNet extrapolates six additional samples from the 12 virtual antenna inputs, and the output is then used to train the FRNet18. The cascaded system provides an improvement of 33 ${\%}$ in angular resolution compared to FRNet12. Additionally, it maintains the probability of resolution (PoR) at nearly 100 ${\%}$ , even when two targets with different amplitudes are within the theoretical angular resolution region. The proposed method is verified using simulation and measurement data from a 77-GHz FMCW MIMO radar with three transmit and four receive antennas. The results of this research demonstrate the potential of applying deep learning to estimate the AoA in an automotive radar system, and the proposed cascaded neural network system represents a significant improvement over the FRNet12 model.