In this letter, a broadband polarization-reconfigurable Fabry-Perot (FP) resonator antenna is presented for WLAN/WiMAX applications. The open air-filled FP cavity is constructed by a partially reflective surface (PRS) layer directly placed over a fully reflective ground plane. A two-element patch array is employed to serve as a feeder. To achieve polarization reconfigurability, the feeding antenna is designed to have the capability of switching between horizontal linear polarization (HP) and vertical linear polarization (VP) by controlling the on/off states of four pairs of p-i-n diodes. By combining the frequency resonances of the FP cavity and the feeding antenna, the proposed FP resonator antenna obtains broadband performance. Furthermore, the proposed antenna achieves a broadband 3 dB gain bandwidth by designing the PRS layer to have a reflection phase with positive slope over as wide a frequency band as possible. The proposed antenna was fabricated and experimentally characterized. Measurements demonstrate that it achieves a -10 dB impedance bandwidth of 21% ranging from 2.2 to 2.72 GHz, which can well cover WLAN/WiMAX band of operation. The 3 dB gain bandwidths of 12.5% and 14.6% are obtained with peak realized gains of 15.1 and 14.8 dBi for the HP and VP, respectively.
29 April 2020 in IEEE Antennas and Wireless Propagation Letters
A compact, high isolation, monostatic, co-circularly polarized (CP) simultaneous transmit and receive (STAR) antenna with similar radiation patterns is presented. The proposed antenna system consists of a sequentially rotated array (SRA) of four dual-polarized antenna elements and two quadrature feeding networks. The four TX/RX ports of the STAR antennas are fed with equal amplitude and relative phase values of 0°, -90°, -180°, and -270° to generate identical right-handed CP (RHCP) for both transmit (TX) and receive (RX) channels. The array element spacing to maximize the radiation performance of the STAR antenna is investigated. Two feeding networks with low phase and amplitude errors are designed based on the sensitivity analysis of the TX/RX isolation, to realize high TX/RX isolation. The whole antenna system is integrated into one RF front end module using multilayer PCB technology. The proposed antenna has a compact size of 122.36 mm (1λ $_0$ ) × 122.36 mm (1λ $_0$ ) × 4 mm (0.03λ $_0$ ), and exhibits more than 40.6 dB TX/RX isolation and better than 1.1 dB axial ratio over the 2.4-2.5 GHz band in the measurements.
26 October 2018 in IEEE Transactions on Antennas and Propagation
A differentially fed dual-polarized planar antenna with a wide bandwidth and high common-mode suppression is presented in this paper. The antenna is composed of four folded dipoles that are connected to each other via the coplanar striplines. Two integrated baluns are utilized to excite the folded dipoles simultaneously to realize ±45° linear polarizations. Owing to the loaded shorting stubs, the impedance matching is improved and the operational bandwidth is broadened. Under differential-mode (DM) excitation, the antenna has a superior unidirectional radiation over a wide bandwidth. Under common-mode (CM) excitation, the antenna achieves a high level of CM suppression performance due to the proposed feeding structure. Measured results exhibit that the antenna gains a wide -15-dB differential impedance bandwidth of 51.1% (1.66-2.80 GHz) and a high port isolation of 38 dB between the differential ports. Moreover, the CM reflection coefficient is larger than -1.32 dB within the DM passband, which indicates that the high CM suppression is attained. To further validate the design concept, a 1×4 antenna array is fabricated and measured to demonstrate the superior performances of wide bandwidth, high port isolation, high CM rejection, and good unidirectional radiation.
15 February 2023 in IEEE Transactions on Antennas and Propagation
A monostatic simultaneous transmit and receive (STAR) antenna system consisting of a metasurface-based STAR antenna and two elaborately-designed microstrip-based feeding networks is proposed to suppress the self-interference (SI) from transmission (TX) to reception (RX), a key challenge in STAR design to realize its potential in doubling system capacity. The metasurface antenna is for the first time used in designing a monostatic STAR antenna system for its compact and wideband characteristics. The proposed STAR antenna system possesses the features of monostatic operation, wide bandwidth, high TX/RX isolation, co-circularly polarized radiation with similar patterns for TX and RX, easy fabrication and low cost. The metasurface-based STAR antenna is formed by four dual-polarized metasurface antennas, or units, and is used for both TX and RX to achieve monostatic operation. A wide operating bandwidth is obtained for each antenna unit by combining the resonate modes of the unit and a crossed slot, the feeding structure of the unit, using characteristic mode analysis (CMA). To achieve high TX/RX isolation and identical right-handed circular polarization (RHCP), the four TX and RX ports of the STAR antenna respectively are excited with equal amplitudes and relative phases of 0°, 90°, 180°, and 270°, by two dedicated-designed wideband feeding networks based on the sensitivity analysis. Accordingly, the proposed STAR antenna system is prototyped. The measurement results show that the STAR antenna system achieves >36 dB TX/RX isolation and <3 dB axial ratio from 4.5 to 6 GHz, and maintains similar radiation patterns with the same RHCP for TX and RX.
9 November 2018 in IEEE Antennas and Wireless Propagation Letters
We present the design of a vehicle-mounted, electrically-small antenna with enhanced bandwidth operating at the very high frequency (VHF) band. Due to the large wavelength of VHF electromagnetic waves, practical vehicle-mounted VHF antennas tend to have compact or electrically-small dimensions. Therefore, they suffer from narrow bandwidth. To alleviate this problem, the platform body can be employed as the main radiator. In this case, the antennas mounted on the platform excite the desired platform mode(s). Efficient and pure excitation of a single-mode, however, usually requires the use of multiple coupling elements distributed across the platform. In this work, we demonstrate that a single, strategically-located electrically-small coupling element can be used to excite multiple significant characteristic modes of an electrically-large platform. This allows for increasing the bandwidth of the antenna without increasing its occupied volume. This is demonstrated by using a capacitively coupling element with electrical dimensions of 0.06λ×0.06λ×0.06λ mounted on a military vehicle, where λ is the free-space wavelength. Our simulation and scaled-model experimental results demonstrate that this approach offers a bandwidth enhancement factor of 6× compared to the isolated antenna and 3.5× compared to an antenna system that excites a single platform mode.
15 September 2021 in IEEE Transactions on Antennas and Propagation
A wideband monostatic simultaneous transmit and receive (STAR) antenna subsystem with high isolation and Co-horizontally polarized (Co-HP) omnidirectional radiation is presented. The antenna subsystem consists of a STAR antenna and a beamforming network (BFN). The STAR antenna consists of a planar circular array having four printed dipole elements surrounded by two groups of parasitic strips. The parasitic strips are used to improve the impedance bandwidth (IMBW) and reduce the gain variation in transmit (TX) and receive (RX) modes. To achieve high isolation, the four ports of the STAR antenna are excited with two orthogonal phase modes for TX and RX using the BFN. The BFN is a six-port network consisting of two 180° hybrid couplers, one 90° hybrid coupler, and a Wilkinson power divider. The 180° hybrid coupler is elaborately designed with low imbalances since it is most key to achieve high TX/RX isolation. Measured results show that the proposed STAR subsystem achieves a TX/RX overlapping IMBW of 4.71–6.2 GHz, and a 40 dB TX/RX isolation bandwidth of 4.81–5.88 GHz, while maintaining horizontally polarized omnidirectional radiation patterns for TX and RX over the entire operating frequency band.