1 November 2017 in Journal of Materials Processing Technology
NMNarges Shayesteh Moghaddam
Narges Shayesteh Moghaddam
+7
5 July 2017 in Physical Chemistry Chemical Physics
The debate regarding the possible molecular origins of the Mullins effect has been ongoing since its discovery. Molecular dynamics (MD) simulations were carried out to elucidate the underlying mechanism of the Mullins effect. For the first time, the key characteristics associated with the Mullins effect, including (a) the majority of stress softening occurring in the first stretch, (b) continuous softening with stress increase, (c) a permanent set, and (d) recovery with heat treatment, are captured by molecular modeling. It is discovered that the irreversible disentanglement of polymer chains is physically sufficient to interpret these key characteristics, providing molecular evidence for this long-controversial issue. Our results also reveal that filled polymers exhibit three distinct regimes, i.e., the polymer matrix, the interface, and the filler. When subjected to external strain, the polymer matrix suffers from excess deformation, indicating strong heterogeneity within the filled polymer, which offers molecular insight for the formulation of physics-based constitutive relations for filled polymers.
1 January 2016 in Procedia CIRP
Poor surface finish of 3D-printed metals significantly deteriorates their corrosion, wear and fatigue resistance. Ultrasonic nano-crystal surface modification (UNSM) is an innovative surface processing technique that utilizes low amplitude ultrasonic frequency vibrations superimposed on a static load to generate plastic deformation on a metal surface to its improve properties and performance. In this study, we investigate the effect of UNSM on the surface finish of 3D-printed metals. An aluminum AlSi10Mg alloy fabricated by direct metal laser sintering (DMLS) was used as an example. It has been demonstrated that UNSM can significantly improve surface finish of 3D-printed aluminum alloy. For example, the surface roughness of the AlSi10Mg alloy was decreased from 18 to 3.5μm. With a better surface finish, UNSM is expected to improve the properties and performance of 3D-printed metals
1 March 2017 in Applied Surface Science
1 September 2017 in Surface and Coatings Technology
1 March 2019 in Materials & Design