23 March 2022 in IEEE/ASME Transactions on Mechatronics
Tractor-trailer vehicles are affected by jackknifing, a phenomenon that consists in the divergence of the trailer hitch angle and ultimately causes the vehicle to fold up. For the case of backward motions, in which jackknifing can occur at any speed, we present a control method that drives the vehicle along generic reference Cartesian trajectories while avoiding the divergence of the hitch angle. This is obtained thanks to a feedback control law that combines two actions: a tracking term, computed using input–output linearization, and a corrective term, generated via IS-MPC, an intrinsically stable MPC scheme which is effective for stable inversion of non-minimum phase systems. The successful performance of the proposed anti-jackknifing control is verified through simulations and experiments on a purposely built one-trailer prototype. To show the generality of the approach, we also apply and test the proposed method on a two-trailer vehicle.
24 March 2025 in IEEE Transactions on Robotics
This paper introduces a computationally efficient robust Model Predictive Control (MPC) scheme for controlling nonlinear systems affected by parametric uncertainties in their models. The approach leverages the recent notion of closed-loop state sensitivity and the associated ellipsoidal tubes of perturbed trajectories for taking into account online time-varying restrictions on state and input constraints. This makes the MPC controller “aware” of potential additional requirements needed to cope with parametric uncertainty, thus significantly improving the tracking performance and success rates during navigation in constrained environments. One key contribution lies in the introduction of a computationally efficient robust MPC formulation with a comparable computational complexity to a standard MPC (i.e., an MPC not explicitly dealing with parametric uncertainty). An extensive simulation campaign is presented to demonstrate the effectiveness of the proposed approach in handling parametric uncertainties and enhancing task performance, safety, and overall robustness. Furthermore, we also provide an experimental validation that shows the feasibility of the approach in real-world conditions and corroborates the statistical findings of the simulation campaign. The versatility and efficiency of the proposed method make it therefore a valuable tool for real-time control of robots subject to non-negligible uncertainty in their models.
17 November 2023 in Robotics and Autonomous Systems
25 September 2024 in IEEE Robotics and Automation Letters
In this letter, we detail a comprehensive framework for safe and robust planning for robots in presence of model uncertainties. Our framework is based on the recent notion of closed-loop state sensitivity , which is extended in this work to also include uncertainties in the initial state. The proposed framework, which considers the sensitivity of the nominal closed-loop system w.r.t. both model parameters and initial state mismatches, is exploited to compute tubes that accurately capture the worst-case effects of the considered uncertainties. In comparison to the current state-of-the-art for safe and robust planning, the proposed closed-loop state sensitivity framework has the important advantage of computational simplicity and minimal assumptions (and simplifications) regarding the underlying robot closed-loop dynamics. The approach is validated via both extensive simulations and real-world experiments. In the experiments we consider as case study a nonlinear trajectory optimization problem aimed at generating an intrinsically robust and safe trajectory for an aerial robot for safely performing an obstacle avoidance maneuver despite the uncertainties. Simulation and experimental results further confirm the viability and interest of the proposed approach.
10 November 2025 in IEEE Robotics and Automation Letters
Model Predictive Path Integral control is a powerful sampling-based approach suitable for complex robotic tasks due to its flexibility in handling nonlinear dynamics and non-convex costs. However, its applicability in real-time, high-frequency robotic control scenarios is limited by computational demands. This paper introduces Feedback-MPPI (F-MPPI), a novel framework that augments standard MPPI by computing local linear feedback gains derived from sensitivity analysis inspired by Riccati-based feedback used in gradient-based MPC. These gains allow for rapid closed-loop corrections around the current state without requiring full re-optimization at each timestep. We demonstrate the effectiveness of F-MPPI through simulations and real-world experiments on two robotic platforms: a quadrupedal robot performing dynamic locomotion on uneven terrain and a quadrotor executing aggressive maneuvers with onboard computation. Results illustrate that incorporating local feedback significantly improves control performance and stability, enabling robust, high-frequency operation suitable for complex robotic systems.