Xinda Qi

Xinda Qi

Auto-generated profile, based on publicly available information

Xinda Qi

Department of Electrical and Computer Engineering, Michigan State University, East Lansing, MI, USA

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2020 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
XQXinda Qi
Xinda Qi
HSHongyang Shi
Hongyang Shi
TPThassyo Pinto
Thassyo Pinto
XTXiaobo Tan
Xiaobo Tan
In this paper we propose a novel pneumatic soft snake robot which exploits traveling-wave motion to move in complex, constrained environments such as a pipeline. The robot is modular, with a unique pneumatic system design that requires the use of only four air channels regardless of the number of modules. The robot is 3D-printed, and thus low-cost and easy to build. Finite element modeling of the bending behavior of each module is conducted in ANSYS. The dynamic behavior of the robot, consisting of six modules, is further modeled in SOFA. In particular, it is found that the locomotion speed of the robot increases with the actuation pressure and decreases with the friction coefficient. Extensive experimental results on a snake robot prototype show good agreement with model predictions. The robot also demonstrates the capability of moving in constrained pipeline environments, including travelling in pipes of different diameters and challenging geometry such as a sharp elbow.

28 May 2025 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Open access
MHMin Hua
Min Hua
XQXinda Qi
Xinda Qi
CDChen Dong
Chen Dong
KJKun Jiang
Kun Jiang
ZLZemin Eitan Liu
Zemin Eitan Liu
HXHongming Xu
Hongming Xu
Connected and automated vehicles (CAVs) have emerged as a potential solution to the future challenges of developing safe, efficient, and eco-friendly transportation systems. However, CAV control presents significant challenges significant challenges due to the complexity of interconnectivity and co-ordination required among vehicles. Multi-agent reinforcement learning (MARL), which has shown notable advancements in addressing complex problems in autonomous driving, robotics, and human-vehicle interaction, emerges as a promising tool to enhance CAV capabilities. Despite its potential, there is a notable absence of current reviews on mainstream MARL algorithms for CAVs. To fill this gap, this paper offers a comprehensive review of MARL’s application in CAV control. The paper begins with an introduction to MARL, explaining its unique advantages in handling complex and multi-agent scenarios. It then presents a detailed survey of MARL applications across various control dimensions for CAVs, including critical scenarios such as platooning control, lane-changing, and unsignalized intersections. Additionally, the paper reviews prominent simulation platforms essential for developing and testing MARL algorithms for CAVs. Lastly, it examines the current challenges in deploying MARL for CAV control, including safety, communication, mixed traffic, and sim-to-real challenges. Potential solutions discussed include hierarchical MARL, decentralized MARL, adaptive interactions, and offline MARL. The work has been summarized in MARL_in_CAV_Control_Repository.

28 November 2022 in Soft Robotics
Verified
Journal Article
Closed access
XQXinda Qi
Xinda Qi
TGTong Gao
Tong Gao
XTXiaobo Tan
Xiaobo Tan
We present a multi-material three-dimensional-printed snakeskin with orthotropic friction anisotropy, which permits undulatory slithering of a soft snake robot on rough surfaces. Such a snakeskin is composed of a soft skin base and embedded rigid scales attached to the robot's ventral surface. The bioinspired designs of scale shapes and arrangements lead effectively to various types of anisotropic friction, and provide means of switching robot's locomotion direction to be either the same as or opposite to the propagation direction of the traveling-wave undulation. Furthermore, steering of locomotion can be achieved by applying additional pressure bias in one air path to break symmetry of body deformation. We also successfully demonstrate the snake robot's mobility on various outdoor rough substrates, including concrete surfaces and a grass lawn, as well as pipes of different dimensions and materials, for potential field applications.

21 April 2017 in IEEE Access
Verified
Journal Article
Open access
XTXintian Tang
Xintian Tang
Yingxiang LiuYingxiang Liu
Yingxiang Liu
SSShengjun Shi
Shengjun Shi
WCWeishan Chen
Weishan Chen
XQXinda Qi
Xinda Qi
Machining of hard and brittle materials is usually troublesome due to their high stiffness. In order to improve the processing speed of hard and brittle materials, ultrasonic assisted processing was developed. This paper reports a novel ultrasonic drill method, where longitudinal-bending hybrid ultrasonic vibration is used instead of single longitudinal or bending vibration. The cutting tool in this process is a core drill attached to an ultrasonic transducer, which generates longitudinal and bending vibrations. Thus an elliptical movement with ultrasonic frequency that is vertical to the working surface is formed at the cutting edge. The longitudinal vibration can help the cutting edge impact the workpiece and thus crush it. With the rotation of the cutting tool, the cutting edge scratches a groove on the working surface. While the bending vibration speeds up the movement of the cutting edge toward the workpiece in the working surface so as to amplify the fracture region. Moreover, a radial clearance assisting chip removal is made by the bending vibration. Merits of this machining method, including improved processing speed and avoidance of jamming are verified by experiment.

6 June 2022 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
MAMohammed Al-Rubaiai
Mohammed Al-Rubaiai
XQXinda Qi
Xinda Qi
ZFZachary Frank
Zachary Frank
RTRyohei Tsuruta
Ryohei Tsuruta
UGUmesh Gandhi
Umesh Gandhi
XTXiaobo Tan
Xiaobo Tan
Polyvinyl chloride (PVC) gels represent a novel type of electroactive polymer actuators with a number of appealing characteristics, including low cost, high compliance, large strain, medium-to-high stress output, fast response, and thermal stability. Despite their vast potential in a variety of applications, modeling and control of nonlinear dynamics of PVC actuators has received little attention. In this article, we first present a data-driven approach to modeling nonlinear dynamics of PVC gel actuators. A Hammerstein model, consisting of a nonlinear module cascaded with linear dynamics, is proposed to capture the pronounced dependence of the voltage input–displacement output frequency response on the input amplitude and bias. A control scheme is then designed based on the model, where an inverse compensator for the nonlinear element is combined with a PID feedback controller. A disturbance observer is further introduced for the estimation and rejection of the influences from imperfect inverse compensation and model uncertainties. Experimental results are presented to support the efficacy of the proposed modeling and control approach. In particular, for a number of reference trajectories, the proposed control scheme results in over 80% reduction of tracking error in comparison with a well-tuned PID controller.

21 May 2024 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
YMYu Mei
Yu Mei
LPLei Peng
Lei Peng
HSHongyang Shi
Hongyang Shi
XQXinda Qi
Xinda Qi
YDYiming Deng
Yiming Deng
XTXiaobo Tan
Xiaobo Tan
Soft robots, with their remarkable advantages in various applications, face the critical challenge of embodied perception, encompassing proprioceptive sensing and perceiving unknown environments (exteroception). In this article, we achieve simultaneous continuous shape reconstruction and external force estimation for soft bending actuators using only a proprioceptive curvature sensor. We introduce a novel distributed inductive curvature sensor designed for capturing continuous shape through electromagnetic induction. In addition, we enhance an analytical static model based on the Euler–Bernoulli curved beam theory to predict the shape under pneumatic actuation and external forces. Furthermore, a model-based optimization algorithm is proposed to estimate external forces based on the measured shape. Extensive experimental validation supports the efficacy of the proposed sensor and algorithms.