Initial efforts on Wireless Power Transfer (WPT) have concentrated towards long-distance transmission and high power applications. Nonetheless, the lower achievable transmission efficiency and potential health concerns arising due to high power applications, have caused limitations in their further developments. Due to tremendous energy consumption growth with ever-increasing connected devices, alternative wireless information and power transfer techniques have been important not only for theoretical research but also for the operational costs saving and for the sustainable growth of wireless communications. In this regard, Radio Frequency Energy Harvesting (RF-EH) for a wireless communications system presents a new paradigm that allows wireless nodes to recharge their batteries from the RF signals instead of fixed power grids and the traditional energy sources. In this approach, the RF energy is harvested from ambient electromagnetic sources or from the sources that directionally transmit RF energy for EH purposes. Notable research activities and major advances have occurred over the last decade in this direction. Thus, this paper provides a comprehensive survey of the state-of-art techniques, based on advances and open issues presented by Simultaneous Wireless Information and Power Transfer (SWIPT) and WPT assisted technologies. More specifically, in contrast to the existing works, this paper identifies and provides a detailed description of various potential emerging technologies for the fifth generation (5G) communications with SWIPT/WPT. Moreover, we provide some interesting research challenges and recommendations with the objective of stimulating future research in this emerging domain.
6 November 2019 in IEEE Transactions on Vehicular Technology
Unmanned aerial vehicles (UAVs) have recently been envisaged as an enabling technology of 5G. UAVs act as an intermediate relay node to facilitate uninterrupted, high quality communication between information sources and their destination. However, UAV energy management has been a major issue of consideration due to limited power supply, affecting flight duration. Thus, we introduce in this paper a unified energy management framework by resorting to wireless power transfer (WPT), simultaneous wireless information and power transfer (SWIPT) and self-interference (SI) energy harvesting (EH) schemes, in cooperative relay communications. In our new technique, UAVs are deployed as relays equipped with a decode and forward protocol and EH capability operating in a full-duplex (FD) mode. The UAV assists information transmission between a terrestrial base station and a user. The UAV's transmission capability is powered exclusively by the energy harvested from WPT, radio frequency signal transmitted from the source via time-switching SWIPT protocol and SI exploitation. We improve the overall system throughput by the use of FD based UAV-assisted cooperative system. In this proposed system, we formulate two optimization problems to minimize end-to-end outage probability, subject to UAV's power profile and trajectory for a DF relay scheme, respectively. The KKT conditions have been used to obtain closed-form solutions for the two formulated problems. Numerical simulation results validate all the theoretical results. We demonstrate that the performance of our proposed unified EH scheme outperforms that of existing techniques in the literature.
In this paper, a resource allocation and data gathering scenario of an unmanned aerial vehicle (UAV) assisted wireless powered sensor network is investigated, in which the sensor nodes (SNs) are remotely powered by power beacons (PBs) via radio-frequency wireless power transmission (RF-WPT). A time-block structure with two phases is proposed to accommodate operations in the proposed system. During Phase-I, SNs harvest energy from PBs and periodically send its sensed data to the selected cluster heads (CHs). In Phase-II, an UAV collects the data from CHs to be delivered to the data sink for further processing avoiding the need for long range transmission and multi hop communication to the data sink. Then, a closed-form expression for outage probability of the proposed system over Rayleigh and Rician fading channels is derived. Next, outage probability minimization problem is formulated to obtain optimal time allocation for RF-WPT energy harvesting to improve the system performance. Due to the complexity of the problem, Lagrangian duality method is used to develop an asymptotic optimal solution with less execution complexity avoiding complex brute force/ exhaustive search approach. Furthermore, a heuristic method is presented to further lower the computation complexity. Simulation results reveal the superiority of the proposed methods compare to brute force/ exhaustive search approach via analysis, comparison and insights of the system performance results. Finally, the performance superiority of the proposed system is demonstrated with compare to identified baseline WSNs.
Simultaneous Information and Power Transfer (SWIPT) for wireless communication systems presents a new paradigm, allowing wireless nodes to recharge their rechargeable batteries from RF signals (instead of fixed line or traditional energy sources) while decoding information. In this approach, the energy is harvested from ambient electromagnetic sources available within the communication system or from sources that directionally transmit RF energy. This work presents an overview, and advancement to date, as well as identifies research issues and challenges in SWIPT and RF Wireless Power Transfer (WPT) assisted technologies. The paper, in principal, addresses innovative 5G communications and Internet of Things (IoT) technologies associated with SWIPT/WPT. The paper finally presents recommendations and future trends associated with this emerging future electricity technique. This provides a valuable reference and new avenues for the future research in this direction.
Unmanned aerial vehicles (UAVs) is a promising technology for the next-generation communication systems. In this article, a fixed-wing UAV is considered to enhance the connectivity for far-users at the coverage region of an overcrowded base station (BS). In particular, a three dimensions (3D) UAV trajectory is optimized to improve the overall energy efficiency of the communication system by considering the system throughput and the UAV's energy consumption for a given finite time horizon. The solutions for the proposed optimization problem are derived by applying Lagrangian optimization and using an algorithm based on successive convex iteration techniques. Numerical results demonstrate that by optimizing the UAV's trajectory in the 3D space, the proposed system design achieves significantly higher energy efficiency with the gain reaching up to 20 bitsJ -1 compared to the 14 bitsJ -1 maximum gain achieved by the 2D space trajectory. Further, results reveal that the proposed algorithm converge earlier in 3D space trajectory compare to the 2D space trajectory.