14 June 2011 in Nanotechnology
A graphene nanoribbon (GNR) is an important basic structure to open a bandgap in graphene. The GNR processes reported in the literature are complex, time-consuming, and expensive; moreover, the device yield is relatively low. In this paper, a simple new process to fabricate a long and straight graphene nanoribbon with a high yield has been proposed. This process utilizes CVD graphene substrate and a ZnO nanowire as the hardmask for patterning. 8 µm long and 50-100 nm wide GNRs were successfully demonstrated in high density without any trimming, and ∼ 10% device yield was realized with a top-down patterning process. After passivating the surfaces of the GNRs using a low temperature atomic layer deposition (ALD) of Al(2)O(3), high performance GNR MOSFETs with symmetric drain-current-gate-voltage (I(d)-V(g)) curves were demonstrated and a field effect mobility up to ∼ 1200 cm(2) V(-1) s(-1) was achieved at V(d) = 10 mV.
1 January 2004 in Integrated Ferroelectrics
The electrical and micro-structural properties of polycrystalline nickel oxides grown by reactive direct current (DC) sputtering were investigated by current-voltage (I-V) measurements, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The oxygen content in the gas mixture was found to be an important parameter affecting the electrical properties of NiO films. At partial pressures above 10%, increasing the oxygen content during sputtering decreased the resistivity. The mechanism of electrical conductivity for the NiO films is discussed from the viewpoint of Nickel or Oxygen vacancies, which generate holes and electrons respectively, vacancy concentration was confirmed by Rutherford backscattering spectrometry (RBS).
1 November 2015 in Current Applied Physics
20 February 2008 in Journal of the Korean Physical Society