1 January 2005 in Optics Express
The application of wire grid polarizers as efficient polarizing beam splitters for visible light is studied. The large differences between the transmissivity for different polarizations are explained qualitatively by using the theory of metallic wave guides. The results of rigorous calculations obtained by using the finite element method are compared with experiments for both classical and conical mount. Furthermore the application of wire-grid polarizers in liquid crystal on silicon display systems is considered.
27 July 2007 in Journal of the European Optical Society-Rapid Publications
We present a comparison among several fully-vectorial methods applied to a basic scattering problem governed by the physics of the electromagnetic interaction between subwavelength apertures in a metal film. The modelled structure represents a slit-groove scattering problem in a silver film deposited on a glass substrate. The benchmarked methods, all of which use in-house developed software, include a broad range of fully-vectorial approaches from finite-element methods, volume-integral methods, and finite-difference time domain methods, to various types of modal methods based on different expansion techniques.
5 July 2013 in Optics Express
GRGopika K. P. Ramanandan
+1
We report on the surprisingly strong, broadband emission of coherent terahertz pulses from ultrathin layers of semiconductors such as amorphous silicon, germanium and polycrystalline cuprous oxide deposited on gold, upon illumination with femtosecond laser pulses. The strength of the emission is surprising because the materials are considered to be bad (amorphous silicon and polycrystalline cuprous oxide) or fair (amorphous germanium) terahertz emitters at best. We show that the strength of the emission is partly explained by cavity-enhanced optical absorption. This forces most of the light to be absorbed in the depletion region of the semiconductor/metal interface where terahertz generation occurs. For an excitation wavelength of 800 nm, the strongest terahertz emission is found for a 25 nm thick layer of amorphous germanium, a 40 nm thick layer of amorphous silicon and a 420 nm thick layer of cuprous oxide, all on gold. The emission from cuprous oxide is similar in strength to that obtained with optical rectification from a 300 μm thick gallium phosphide crystal. As an application of our findings we demonstrate how such thin films can be used to turn standard optical components, such as paraboloidal mirrors, into self-focusing terahertz emitters.
3 September 2021 in ChemCatChem
Sunlight‐powered reduction of CO2 to fuels and chemicals is a promising strategy to close the carbon loop and facilitate the energy transition. In this research, we demonstrate that Au nanoparticles supported on TiO2 are an efficient plasmonic catalyst for the sunlight‐powered reverse water‐gas shift (rWGS) reaction. A maximum CO production rate of 429 mmol ⋅ gAu−1 ⋅ h−1 with a selectivity of 98 % and an apparent quantum efficiency of 4.7 % were achieved using mildly concentrated sunlight (1.44 W ⋅ cm−2 equals 14.4 sun). The CO production rate showed an exponential increase with increasing light intensity, suggesting that the process is mainly promoted by a photothermal effect. Thermal reference experiments with the same catalysts promoted CH4 formation, dropping the CO selectivity to 70 %. Thus, mildly concentrated sunlight can efficiently and selectively enhance the promotion of the rWGS reaction without using external heating.
22 July 2020 in ChemCatChem
Plasmon catalysis is an interesting technology concept for powering chemical processes with light. Here, we report the use of various Al2O3‐supported Ru spheroidal nanoparticles as catalyst for the low‐temperature conversion of CO2 and H2 to CH4 (Sabatier reaction), using sunlight as energy source. At high loadings of Ru spheroidal nanoparticles (5.9 % w/w), we observe a sharp increase in the rate of the sunlight powered reaction when compared to the reaction in dark at the same catalyst bed temperature. Based on our results we exclude plasmon coupling as cause, and attribute the rate enhancement to collective photothermal heating of the Al2O3‐supported Ru nanoparticles.
8 August 2016 in Plasmonics
DNDaniel Nascimento-Duplat
+3
Au and Ag nanoshells are of interest for a wide range of applications. The plasmon resonance of such nanoshells is the property of interest and can be tuned in a broad spectral regime, ranging from the ultraviolet to the mid-infrared. To date, a large number of manuscripts have been published on the optics of such nanoshells. Few of these, however, address the effect of particle size distribution and metal shell imperfections on the plasmon resonance. Both are inherent to the chemical synthesis of metal nanoshells and therefore to a large extent unavoidable. It is of vital importance to understand their effect on the plasmon resonance, since this determines the scope and limitations of the technology and may have a direct impact on the application of such particles. Here, we elucidate the effect of particle size distribution and imperfections in the metal shell on the plasmon resonance of Au and Ag nanoshells. The size of the polystyrene core and the thickness of the Au and Ag shells are systematically varied to study their influence on the plasmon resonance, and the results are compared to values obtained through optical simulations using extended Mie theory and finite element method. Discrepancies between theory and practice are studied in detail and discussed extensively. Quantitative information on the minimum thickness of the metal shell, which is required to realize a satisfactory plasmon resonance of a metal nanoshell, is provided for Au and Ag.