Muhammed Elitas

Muhammed Elitas

Auto-generated profile, based on publicly available information

Muhammed Elitas

Bilecik Şeyh Edebali Üniversitesi

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2023 in Materials Testing
Verified
Journal Article
Closed access
MEMuhammed Elitas
Muhammed Elitas
MGMustafa Goktas
Mustafa Goktas
MAMustafa Acarer
Mustafa Acarer
BDBilge Demir
Bilge Demir
In this study, production of dual phase steel-Al 1100 aluminium alloy laminated composite by explosive welding and investigation the microstructural and mechanical properties especially fatigue life of the composite and its components were aimed. Finite element analysis (FEA) was used to simulate the bending fatigue tests of the Al 1100-DP steel (LITEC 1050) bimetal. A semi-wave at the explosive interface with intermetallic was obtained as a microstructural result. Hardness was increased near the interface due to deformation and intermetallic formation at the explosive weld interface. The impact test results showed that the samples’ impact toughness was enriched by fabricating steel-Al laminated composite. The results also showed that the Al 1100-DP steel (LITEC 1050) bimetal composite properties were appropriate to the composite theory and satisfied strength-ductility relations accomplished. Additionally, the bending fatigue test and FEA results were compatible. Moreover, fatigue cracks were observed at the explosive weld interface between Litec DP steel and intermetallic but not at the Al-intermetallic interface.

3 April 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
MEMuhammed Elitas
Muhammed Elitas
In this study, different resistance spot welding joints were made on DC01 steel with welding parameters of 8–10–12 kA welding currents and 1.96–2.94 kN electrode forces. Measurements of the nugget diameter and tests of the tensile shear were performed. Also, various failure modes were determined. The importance of welding parameters on the value of the tensile shear force was determined, and a statistical model was established with the ANOVA study. The microstructure of the joint was characterized by optical and scanning electron microscopes. As a result, the nugget diameter and the tensile shear force were increased with an increase in the welding current and the electrode force. Two failure modes, namely, interfacial and plug failures, were observed. The effect of the electrode force was higher than the welding current on the tensile shear force. The base material was densely composed of the ferrite phase, heat-affected, and the fusion zone consisted of the coarse ferrite phase.

9 August 2023 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
AAAbdulkarim ALZAHOUGi
Abdulkarim ALZAHOUGi
BDBilge Demir
Bilge Demir
MEMuhammed Elitas
Muhammed Elitas
Resistance Spot Welding (RSW) is widely used in many automotive, boiler, and ship manufacturing industries. Therefore, the optimization and effectiveness of the RSW process are very useful and cost-efficient processes in addition to improving weld quality. This study used various welding parameters to investigate the optimization of the RSW process of Advanced High Strength Steel (AHSS). RSW was carried out using different welding times, currents, and electrode pressure values. Microstructural analysis, nugget formation, and tensile shear test were performed on samples. This study applied the Taguchi method and ANOVA to set up the welding process and optimize its results. Microstructural characterization showed that the weld nugget microstructures had a high-volume fraction of martensite. Using the Minitab software, Taguchi (DOE) and ANOVA on the tensile shear test results showed that welding current is more effective than clamping pressure on the tensile shear load-bearing capacity (TLBC). However, clamping pressure affects the weld current effects on weld performance. Additionally, the TLBC of RSW samples increases, whereas increasing the clamping pressure leads to a decrease in TLBC and nugget dimensions. Consequently, a detailed analysis of the RSW coefficients and their effects led to optimized results.

21 October 2025 in Materials Testing
Verified
Journal Article
Closed access
MEMuhammed Elitas
Muhammed Elitas
AGAhmet Serdar Güldibi
Ahmet Serdar Güldibi
MEMehmet Akif Erden
Mehmet Akif Erden
In this study, resistance spot welding (RSW) joints of DP450 and DP800 steels were produced using three different electrode forces (2.1 daN, 2.8 daN, 3.5 daN) and three different welding currents (9 kA, 10 kA, 11 kA). The effects of different welding parameters on microstructure, tensile shear force (TSF), failure mode, and microhardness were investigated. The focus was on optimizing the welding parameters. As a result, the RSW process led to the formation of three distinct regions in the microstructure: the base metal (BM), the heat-affected zone (HAZ), and the weld metal (WM). Generally, the TSF increased with higher heat input resulting from decreased electrode force and increased welding current. However, in similar joints, an increase in welding current from 10 kA to 11 kA caused expulsion, negatively affecting the welding quality. The maximum TSF value (15.59 kN) was obtained in DP800-DP800 joints welded with 2.1 daN-10 kA welding parameters. After the tensile shear tests, three different failure modes were observed: Interfacial failure (IF), partial interfacial failure (PIF), and pull-out failure (PF). Hardness values exhibited a linear correlation with TSF results. Furthermore, a significant increase in hardness values was observed from the BM to the WM across all welding parameters.

15 June 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
MEMuhammed Elitas
Muhammed Elitas
MEMehmet Akif ERDEN
Mehmet Akif ERDEN
Resistance spot welding was implemented to unalloyed steel produced by powder metallurgy method at different welding parameters in this study. Other welding parameters are constant, but electrode force values are 0.21–0.28–0.35 kN and welding current values are 9–10–11 kA. The effects of different welding parameters on microhardness, nugget diameter, tensile shear force, and failure mode were investigated. Consequently, the tensile shear force increased as welding current and electrode force up to a certain value increased. When critical electrode force value was exceeded, tensile shear force decreased, although nugget diameter increased. Compared to the base material, a decrease in tensile shear force has occurred in resistance spot welded joints. Except for values higher than the critical electrode force value, a linear relationship was determined between the nugget diameter, tensile shear force, and microhardness. Two different failure modes were observed, namely sheet transverse failure and partial interfacial failure.

31 January 2021 in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
Verified
Journal Article
Closed access
PDF file
MEMuhammed Eli̇taş
Muhammed Eli̇taş
Bu çalışmada nokta direnç kaynaklı DP1200 çeliğinin ideal çekme makaslama dayanımını elde etmek için farklı kaynak akımı ve elektrot basıncı parametrelerinin optimizasyonuna odaklanılmıştır. Kaynak prosesleri 5 kA ve 7 kA kaynak akımlarında, 2-6 bar elektrot basınçlarında gerçekleştirilmiştir. Kaynak parametrelerinin çekme makaslama dayanımı üzerindeki etkileri çoklu doğrusal regresyon analizi ile incelenmiştir. Yapılan bu analiz ile elde edilen korelasyon tablosu ve ANOVA analiz değerleri yorumlanmıştır. Kaynak parametrelerinin önem derecesi belirlenerek, çekme makaslama dayanımı üzerindeki etkileri karşılaştırılmış ve belirlenen etki değerlerine göre çoklu doğrusal regresyon modeli oluşturulmuştur. Deneysel sonuçlar çekme makaslama dayanımını etkileyen en önemli değişkenin kaynak akımı olduğunu göstermiştir. Kaynak akımı arttıkça çekme makaslama dayanımı artmıştır. Özellikle yüksek kaynak akımı değerinde, elektrot basıncının kritik değerine kadar çekme makaslama dayanımının arttığı, fakat kritik değerinin üzerinde dayanımda düşüş olduğu görülmüştür. Sıçramanın çekme makaslama dayanımı üzerinde negatif etkiye sahip olduğu gözlenmiştir.