1 March 2017 in International Journal of Applied Electromagnetics and Mechanics
Three-phase bearingless induction motor is a multivariable, nonlinear and strong coupling object, to achieve its decoupling control with high performance, an inverse system decoupling control strategy based on air gap flux orientation is proposed. Under the conditions of air gap flux orientation of torque system, the stator currents of torque winding and suspension winding are taken as input variables, and the inverse system mathematical model of bearingless induction motor is established; adopting the inverse system method, the bearingless induction motor is decoupled into four pseudo linear subsystems, include motor speed first-order integral subsystem, air gap flux-linkage first-order integral subsystem, α and β displacement components second-order integral subsystems. The structure of decoupling control system is presented also. From the simulation results, it is clear that not only the air gap flux-linkage of torque system can be controlled accurately and directly, but also the dynamic decoupling control between motor speed, air gap flux-linkage of torque system and two radial displacement components can be achieved; Meanwhile, the control system has the characteristics of small overshoot and fast response speed.
1 January 2021 in Procedia Computer Science
11 September 2023 in Archives of Electrical Engineering
Transmission lines’ live working is one of an effective means to ensure the reliable operation of transmission lines. In order to solve the unsafe problems existing in the implementation of traditional live working, the paper uses ground-based lidar to collect point cloud data. A tile based on the pyramid data structure is proposed to complete the storage and calling of point cloud data. The improved bidirectional filtering algorithm is used to distinguish surface features quickly and obtain a 3D model of the site. Considering the characteristics of live working, the speed of data reading and querying, the nearest point search algorithm based on octree is used to acquire a real- time calculation of the safe distance of each point in the planned path, and the safety of the operation mode is obtained by comparing with the value specified in the regulation, and assist in making decisions of the operation plan. In the paper, the simulation of the actual working condition is carried out by taking the “the electric lifting device ascending” as an example. The experimental results show that the established three-dimensional model can meet the whole process control of the operation, and has achieved practical effect.
16 December 2024 in Archives of Civil Engineering
To investigate the effect of polypropylene fibers on the mechanical properties of concrete structures in cold regions, obtain an appropriate amount of polypropylene fiber content, and improve the frost resistance of the structure, freeze-thaw cycle tests were conducted on three groups of reinforced concrete short column specimens with different polypropylene fiber contents. The depth of surface damage of the specimen was detected using ultrasonic method. The stress process and failure of the specimen were analyzed through axial compression test, and the corresponding changes in compressive toughness were discussed. A formula for calculating the axial compressive bearing capacity of polypropylene fiber reinforced concrete short columns after freeze-thaw cycles was established. The test results indicate that the addition of polypropylene fibers can reduce the compressive bearing capacity of reinforced concrete short columns. An appropriate amount of polypropylene fiber can enhance the frost resistance, ductility and toughness of concrete components, and the recommended volume fraction of polypropylene fiber is 0.08–0.12%.