EPANET 2 software has been widely used among researchers and practitioners from its inception for hydraulic analysis. This technical note presents a method to simulate pressure-dependent volume-based demands in a single extended-period simulation run of EPANET 2. In the proposed method, artificial strings made up of a pipe with a minor loss, pressure-sustaining valve, pipe of negligible resistance, and tank are added to the demand nodes before running the hydraulic analysis. The time required to satisfy a volume-based demand is determined as the time required to fill the artificial tank connected to the demand node for normal and pressure-deficient conditions. All the simulations were carried out using the available functions of the graphical user interface of EPANET 2. The proposed method was applied to a two-source looped network available from the literature and additionally compared with an existing method available in the literature using two example networks.
1 May 2021 in Journal of Water Resources Planning and Management
This technical note presents a technique for the pressure-driven analysis (PDA) of water distribution networks with flow- and pressure-regulating valves. The technique is a combination of a PDA method based on adding artificial components (a pipe with a check valve, a flow control valve, and an emitter) to each demand node and a hybrid simulator that models valves as pipes of variable resistance in cases where the EPANET 2.0 valve treatment heuristics fails. The examples considered demonstrate that the proposed PDA technique may be an alternative to EPANET 2.2, the latest version of EPANET 2.0 with a PDA option, in cases where the latter is not applicable or fails to compute the correct solution.
1 November 2018 in Journal of Water Resources Planning and Management
This paper presents a simple valve simulation method integrable into the global gradient algorithm (GGA), which is widely used in hydraulic analysis of water distribution systems. In the proposed method, valves are treated as pipes whose resistance is adjusted in the course of the GGA iteration to meet the valve setting. This method features a unified approach to pressure control and flow control valves. Comparison tests on example networks have shown that the proposed method computes the same results as an independent optimization-based method in a comparable number of iterations and copes with the cases where EPANET 2 produces incorrect results. The proposed method may easily be integrated into existing GGA-based hydraulic solvers, in particular into that of EPANET 2.
This paper addresses the problem of displacement measurement by a three-probe implementation of microwave interferometry in cases where the reflection coef