In this work, a blending strategy based on compounding the hydrophilic titanium dioxide (TiO2) particles with the host polypropylene (PP) pellets, followed by the common membrane manufacture process of melt extruding/annealing/stretching, was used to improve the polarity and thus electrolyte uptake capability of the PP-based microporous membranes. The influence of the TiO2 particles on the crystallinity and crystalline orientation of the PP matrix was studied using differential scanning calorimetry (DSC), X-ray diffraction (XRD), and infrared dichroic methods. The results showed that the TiO2 incorporation has little influence on the oriented lamellar structure of the PP-based composite films. Investigations of the deformation behavior indicated that both the lamellar separation and interfacial debonding occurred when the PP/TiO2 composite films were subjected to uniaxial tensile stress. The scanning electron microscopy (SEM) observations verified that two forms of micropores were generated in the stretched PP/TiO2 composite membranes. Compared to the virgin PP membrane, the PP/TiO2 composite membranes especially at high TiO2 loadings showed significant improvements in terms of water vapor permeability, polarity, and electrolyte uptake capability. The electrolyte uptake of the PP/TiO2 composite membrane with 40 wt % TiO2 was 104%, which had almost doubled compared with that of the virgin PP membrane.
In this paper, polypropylene (PP) and polypropylene/poly(ethylene-co-octene) blends (PP/POE) were fabricated into alternating multilayered materials to improve the low-temperature toughness of PP efficiently compared with conventional PP/POE blends. POM, SEM, micro-FTIR and part-impact test were performed to characterize and investigate the alternating multilayered microstructure and its relationship with mechanical properties. The results showed that the unique alternating multilayered microstructure could generate a distinctive distribution of POE, resulting in the great change in both macro- and micro-morphology of the materials. Most interestingly, the morphological evolution of the dispersed POE phase before and after the impact showed that a brittle–ductile transition (BDT) layer was formed at the interlayer interface between the adjacent PP layer and the PP/POE layer during the impact process, which was the main reason for the great improvement of the low-temperature toughness. Moreover, the rigidity of alternating multilayered materials was maintained very well because of the existence of the rigid PP layer, indicating that the alternating multilayered microstructure was very helpful to maintain a good balance between toughness and rigidity.
Here, the recent advances in hydrogels for stem cell therapy are summarized, aiming to provide a reference for the crossover and integration of hydrogels and stem cells in the field of tissue engineering.
Realizing simultaneous reinforcement and toughening in polypropylene based on polypropylene/elastomer via controlling crystalline structure and dispersed phase morphology.