1 July 2011 in Journal of Materials in Civil Engineering
The use of reclaimed asphalt pavement (RAP) aggregate materials in road construction reduces natural resource depletion and promotes the recycling of RAP materials for other applications. However, product variability and low resilient moduli characteristics often limit RAP applications in road bases. Stabilization of RAP materials with cement was hence attempted in a research study to evaluate the effectiveness of cement treatments in enhancing resilient characteristics of RAP aggregates. The present paper describes the results from a series of resilient modulus tests that were conducted in a laboratory environment using a repeated load triaxial test setup. The effects of three different cement dosages and various confining and deviatoric stress levels on the resilient modulus (MR) response of treated RAP materials were studied. MR values of untreated and cement-treated RAP aggregates ranged from 180 to 340 MPa and 200 to 515 MPa, respectively, which reveal the enhancements with cement treatment. Regressi...
1 June 2012 in Journal of Geotechnical and Geoenvironmental Engineering
The soil cement deep mixing method has been used to improve soft clayey soils under embankment loading conditions. A compacted granular fill layer or geosynthetic reinforcement layer is placed over the top of soil cement deep mixed (DM) columns to reduce differential settlement between DM soil and the surrounding untreated soil, which, in turn, increases embankment stability. Typically, in conventional deep mixing methodology, the soil cement columns are closely spaced, indicating large area replacement ratios in the construction projects. Such practice could increase construction costs substantially. In this research, a new type of DM column, called a T-shaped DM (TDM) column, was designed and used as an alternative to the large-area-replacement-ratio DM columns employed in the field. Unlike in the conventional column, the cross section of the new column varies along the installation depth. Large amounts of cement slurry are injected and thoroughly mixed with the native shallow soil using special...
1 March 2005 in Journal of Geotechnical and Geoenvironmental Engineering
Sulfate-induced heaving in soils is primarily attributed to ettringite formation from the reactions between calcium of a lime or cement stabilizer, reactive alumina in soils, and sulfates in soils. Ettringite formation and subsequent heaving in soils are complex topics that are not well understood. This research is an attempt to advance the state of the knowledge on these topics. Ettringite was successfully synthesized in the laboratory by simulating conditions close to those in chemically treated sulfate-bearing soils. Soils spiked and compacted with the synthesized ettringite did not undergo heaving in one-dimensional free swell tests. However, heaving was observed when ettringite was formed inside the lime-treated soil specimen by including ionic reactions. Mineralogical studies including x-ray diffraction and scanning electron microscope studies were used to evaluate the presence of ettringite. Experimental investigations showed that the ettringite or sulfate-induced heaving was higher in clays than i...
1 July 2011 in Journal of Materials in Civil Engineering
The use of reclaimed asphalt pavement (RAP) materials in road construction has been proven to reduce both the amount of construction debris disposed of in urban landfills and the rate of depletion of natural resources. However, source-dependent product variability, federal and local environmental regulation, and deficient strength-stiffness characteristics often limit RAP applications in road bases. These limitations have led to new research efforts aimed at exploring novel, cost-effective, chemical and/or mechanical stabilization methods to treat RAP materials before their reuse in pavement construction. In this work, a series of tests were performed on RAP aggregate materials treated with different dosages of portland type I/II cement and with alkali-resistant glass fibers. Tests include permeability, leachate, unconfined compression, and small-strain shear moduli through resonant column testing. Leachate tests include pH, total and volatile dissolved solids, total and volatile suspended solids, and tur...
1 April 2006 in Journal of Materials in Civil Engineering
In this paper, class F fly ash, bottom ash, polypropylene fibers, and nylon fibers were evaluated as potential stabilizers in enhancing volume change properties of sulfate rich expansive soils. As a part of the research evaluation, a comprehensive laboratory experimental program was designed and conducted on two different subgrade soils from two locations in Texas. Four dosage levels of each stabilizer, two compaction moisture content levels, and 14 days curing period were investigated. Volume change behavioral tests including volumetric free swell, volumetric shrinkage strain, and vertical swell pressure tests were conducted on both isolated stabilizer treated and combined ash-fiber stabilized soils. Ash stabilizers showed improvements in reducing swelling, shrinkage, and plasticity characteristics by 20–80% whereas fibers treatments resulted in varied improvements. In combined treatments, class F fly ash mixed with nylon fibers was the most effective treatment on both Dallas and Arlington soils, where t...
1 October 2009 in Journal of Geotechnical and Geoenvironmental Engineering
Mechanistic-empirical pavement design guide for flexible pavements as per the AASHTO design guide requires characterization of subgrade soils using the resilient modulus ( MR ) property. This property, however, does not fully account for the plastic or permanent strain or rutting of subgrade soils, which often distress the overlying pavements. Soils such as silts exhibit moderate to high resilient moduli properties but they still undergo large permanent deformations under repeated loading. This explains the fallacy in the current pavement material characterization practice. A comprehensive research study was performed to measure permanent deformation properties of subgrade soils by subjecting various soils under repeated cycles of deviatoric loads. This paper describes test procedure followed and results obtained on three soils including clay, silt, and sandy soils. The influence of compaction moisture content, confining pressure, and deviatoric stresses applied on the measured permanent deformations of a...