This letter reports a systematic simulation study of the performance of mobile terminal antennas in the vicinity of the user's hand. The effects of antenna dimensioning and antenna location on the ground plane of the device are demonstrated. The studied performance parameters are quality factor, radiation efficiency, and frequency detuning. Based on the results, beneficial approaches and general guidelines for antenna designs with a reduced effect of the user's hand can be given. For instance, it is shown that the radiation efficiency with the user's hand stays nearly constant (variation <;0.2 dB) despite the changes in the antenna element height (2-6.6 mm at 900 and 2000 MHz).
30 April 2020 in IEEE Transactions on Antennas and Propagation
This article presents a dual-polarized millimeterwave end-fire antenna array for mobile devices. The antenna array is integrated inside a metal-framed mobile phone and radiates through a 20 × 3.5mm2 window in the metal frame. Measurement results show a realized gain above 6 dBi for the frequency band of 28 to 33 GHz for a 3-element array. Beamsteering up to ±40° is possible. The array is physically offset from the metal frame, thus minimizing the capacitive loading effect on the sub-6GHz antennas. Moreover, due to the lack of mechanical contact between the frame and the antenna module, the antenna is robust against external impacts or hits to the phone. The design of the antenna module facilitates integration in mobile devices for mm-wave operation.
16 June 2020 in IEEE Transactions on Antennas and Propagation
This article describes a dual-polarized end-fire antenna array for millimeter-wave frequencies. The antenna consists of a chain-slot-shaped pattern on a mobile phone metal frame. The antenna is fed using a transmission line, which would cause only a negligible capacitive loading of the sub- 6 GHz antenna realized on the same metal frame and, therefore, would not significantly degrade its perfomance. This makes colocating the sub-6GHz and mm-wave antennas in the same, shared volume possible. Measurements indicate that a 4-element array placed within a mobile phone provides a realized gain between 8 and 12.6 dBi for both polarizations across the entire band from 24.5 to 29.5 GHz. The total efficiency of a single element is better than -2 and -3 dB for the whole band for horizontal and vertical polarizations, respectively.
8 July 2010 in IEEE Antennas and Wireless Propagation Letters
In this letter, it is shown how the behavior of a capacitive coupling element (CCE)-based mobile terminal antenna can be modeled at the UHF band as a combination of the separate wavemodes of the structure. The proposed equivalent circuit model improves the general understanding of the operation of the antenna structure. It can be used for analyzing the combined performance of the capacitive coupling element and terminal chassis, but it also helps in analyzing how different parts of the antenna structure contribute to the impedance and radiation.
23 June 2023 in IEEE Transactions on Antennas and Propagation
In this paper, a dual-polarized frequency-reconfigurable mm-wave patch antenna array is described. The design incorporates varactor diodes symmetrically loaded onto the four corners of a square patch. Parallel plate series capacitors are constructed to achieve the required low total capacitance by moving the square patch to an inner layer. Additionally, novel dual-function shorting vias are implemented into the structure, which serve as RF choke for providing dc-bias voltage to the varactors, and behave as shunt inductive loadings to improve radiation efficiency. A four-element antenna array is implemented, and placed into a 21×4.5mm 2 cavity. The proposed antenna array can be tuned from 23.2 to 30.2 GHz by adjusting the varactor capacitance from 0.22 to 0.033 pF. The array achieves over 20-dB isolation between the orthogonal-polarized antenna elements, and more than 15-dB isolation between the same-polarized antenna elements. Total efficiency exceeds -2.5 dB across the tuning range. Peak gain varies from 8.9 to 10.5 dBi. The proposed dual-polarized antenna array offers notable advantages including a wide frequency-tuning range, high efficiency, compact size, and beam-forming capability.