15 October 2026 in Measurement Science and Technology
The rotation of a rotary table inevitably induces six typical motion errors. To improve the measurement efficiency and accuracy of rotary table motion error detection, this paper proposes a novel system for the simultaneous online measurement of six-degree-of-freedom (6-DOF) motion errors. The system consists of a 5-DOF measurement module and an independent angular position error measurement module. The proposed system innovatively integrates an axial motion error measurement module into the original 4-DOF measurement framework. Based on the optical collimation principle, the system employs a beam-splitting flat plate to split the light beam of the original 4-DOF optical path, enabling real-time monitoring of the axial motion error of the rotary table. Meanwhile, an optical path adjustment strategy for axial motion error detection is proposed. Based on geometric analysis, an error model is constructed to eliminate the interference of radial and tilt motion errors on axial motion measurement, thereby achieving accurate acquisition of six-dimensional motion errors. The experimental results indicate that the angular error measurement accuracy of the proposed system is ±2″ within a measurement range of ±100″, with a standard deviation ( σ ) of 1.3″. For linear error measurement, the accuracy reaches ±3 μm over the ±100 μm range, accompanied by a standard deviation of 1.7 μm. The experimental results confirm the favorable accuracy and stability of the proposed 6-DOF measurement system for rotary table error measurement. Therefore, the system is applicable to precision rotary tables (⩾2 σ ), and future work will focus on performance optimization to extend its capability to ultra-precision rotary axis measurement.