21 September 2012 in Nano Research
The magnitude of the optical sheet conductance of single-layer graphene is universal, and equal to e 2/4ħ (where 2πħ = h (the Planck constant)). As the optical frequency decreases, the conductivity decreases. However, at some frequency in the THz range, the conductivity increases again, eventually reaching the DC value, where the magnitude of the DC sheet conductance generally displays a sample- and doping-dependent value between ∼e 2/h and 100 e 2/h. Thus, the THz range is predicted to be a non-trivial region of the spectrum for electron transport in graphene, and may have interesting technological applications. In this paper, we present the first frequency domain measurements of the absolute value of multilayer graphene (MLG) and single-layer graphene (SLG) sheet conductivity and transparency from DC to 1 THz, and establish a firm foundation for future THz applications of graphene.
12 July 2010 in Proceedings of the IEEE
Radio-frequency identification (RFID) technology relies on the modulated scattering technique (MST) as a means to convey the information from the tag to the reader. The interaction mechanism between the reader and the tag is described in a physically meaningful way by the reciprocity theorem which is deeply rooted into Maxwell equations. This approach provides a simple and yet complete formulation that allows to fully describe the interaction between the reader and the tag, even in complex environments. From this formulation, a clear understanding is derived on how the different design tradeoffs affect system performance. Based on this approach, the paper is focused on several issues of practical relevance for antenna tag design such as maximum power transfer, maximum sensitivity, and nonlinearity effects.
23 August 2010 in IEEE Transactions on Instrumentation and Measurement
In this paper, a passive multiprobe sensor using conventional UHF radio frequency identification (RFID) tags is presented. The RFID link between the reader and the tag is analyzed from a general point of view by means of reciprocity principle, to obtain a compact and explicit expression of the response of RFID tags that can be exploited in sensing measurements. A calibration scheme to remove nonlinearities in the response of RFID tags, which are due to the scavenging powering mechanism of passive tags, is also presented along with measurements. Finally, experimental results and discussion of a complete multiprobe sensing scenario are used to show the different challenges involved and how to overcome them.
18 August 2022 in IEEE Transactions on Antennas and Propagation
This article proposes an original structure of evanescent quadridge antenna (EQA) to conceive dual-polarized full-metal front-ends that can be used in active antennas (AAs) with wide field-of-view (FoV). An original design methodology is here proposed that allows to induce radiation from subwavelength squared apertures based on the use of evanescent and quadridge waveguides. The proposal is illustrated by means of a design with 4.5% bandwidth providing dual-circular polarization (CP) with good performance up to 50°-scanning even in the diagonal plane. For comparison purposes, a metallic benchmark is also proposed, which is based on the use of classical quadridge horns. Such comparative analysis allows to understand the superior performance of the proposed concept and its main advantage: it allows to avoid the excitation of the first high order mode in the squared quadridge aperture. The excitation of such spurious mode in the antenna is explained in terms of simple equivalent circuit models characterizing the aperture periodic discontinuity.
8 November 2018 in IEEE Transactions on Microwave Theory and Techniques
This paper reports a novel methodology to design broadband orthomode transducers with two arbitrarily spaced ports carrying orthogonal linear polarizations. The component is based on a combination of two Bøifot junctions through a series of power dividers that act as an embedded first level of the beamforming network of a radio frequency system. By controlling the separation between the ports, this original component can be used in different applications such as antenna arrays for satellite connectivity-on-the-move (where the spacing between ports must be as small as possible) or multibeam sparse arrays (where the spacing between ports may change along the array lattice). In order to verify the proposed design methodology, two identical prototypes have been produced using additive manufacturing. A complete set of measurements (standalone and back-to-back) have been carried out producing satisfactory results that are in very good agreement with the simulations.