Fertilizer leaching and water slack are the most problems predominantly found in the agriculture practices. Many efforts have been done by promoting a medium for controlling fertilizer release and water retaining in vicinity of plant and soil. In this work, a biodegradable Premna Oblongifolia Merr (POM) extract/polyvinyl alcohol (PVA) composite based hydrogel for controlled-release and water absorption application has been prepared. The hydrogel composite was successfully synthesized through solution mixing of POM and PVA with an aid of crosslinking agent (glutaraldehyde) at optimum composition in volume ratio of 5:5:9, respectively. In particular, the fertilizer (Zinc nitrate) solution was incorporated into hydrogel matrix for controlled release study. The structural morphology of hydrogel composite was investigated by means of Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction. The water absorption capacity and fertilizer-controlled release behaviour of hydrogel composite were evaluated by gravimetric and atomic absorption spectroscopy techniques, respectively. The FTIR spectra showed the evidence of copolymerization of hydrogel precursors, indicated by the shifting of peak intensity and position of several functional groups (O-H, C-H sp 3 , C=O, C-N, CO) as a result of interaction between POM extract and PVA moieties which predominantly occurs through intermolecular hydrogen bonding. In particular, the crosslinking of PVA and POM extract mediated by glutaraldehyde was evidenced by the appearance of new peak for-CO -C moieties owing to the formation of hemiacetal bridges in between polymer backbones. The insertion of fertilizer into hydrogel matrix was sharpen the peaks of hydrogel moieties and led to new peak appearance at 1384 cm-1 (NO moieties), correspond to the interaction with zinc ions. The X-ray diffraction confirmed the modification of structural morphology of hydrogel with fertilizer insertion as indicated by the slight shift of interlayer distance of polymer matrices. The hydrogel composites showed the large water absorption capacity up to 550 % and could retained water in its matrix for almost 3 weeks. Absorption and released studies indicate that the micronutrient interacts chemically with a surface functional group of hydrogel. The released micronutrient should come from the second and the upper layer where it occurs only at high concentration. These results offer the promising applications for the controlled-release and water absorbent materials.
The effects of benzalkonium chloride (BKC) contents on the structure, properties, and ultrafiltration performance of chitosan-based nanocomposite membranes containing poly(ethylene glycol) and multi-walled carbon nanotube (chitosan/BKC/PEG/CNT) were examined. The membranes were prepared by a mixing solution method and phase inversion before being characterized with microscopic techniques, tensile tests, thermogravimetric analysis, water contact angle, and porosity measurements. The performance of the nanocomposite membranes in regard to permeability (flux) and permselectivity (rejection) was examined. The results show that the incorporation of BKC produced nanocomposite membranes with smaller pore structures and improved physico-chemical properties, such as an increase in porosity and surface roughness (Ra = 45.15 to 145.35 nm and Rq = 53.69 to 167.44 nm), an enhancement in the elongation at break from 45 to 109%, and an enhancement in the mechanical strength from 31.2 to 45.8 MPa. In contrast, a decrease in the membrane hydrophilicity (water contact angle increased from 56.3 to 82.8°) and a decrease in the average substructure pore size from 32.64 to 10.08 nm were observed. The membrane rejection performances toward Bovine Serum Albumin (BSA) increased with the BKC composition in both dead-end and cross-flow filtration processes. The chitosan/BKC/PEG/CNT nanocomposite membranes have great potential in wastewater treatments for minimizing biofouling without reducing the water purification performance.
30 December 2022 in Chemical Engineering Research and Design
A hydrogel based on poly(vinyl alcohol) (V), Premna Oblongifolia Merr. extract (O), glutaraldehyde (G), and carbon nanotubes (C) has been synthesized in search of candidates to develop controlled‐release fertilizers (CRF). Referring to previous studies, O and C can be considered as two materials that have potential as modifiers in synthesizing CRF. This work is comprised of hydrogel synthesis, their characterisation, including measuring swelling ratio (SR) and water retention (WR) of VOGm, VOGe, VOGmC3, VOGmC5, VOGmC7, VOGmC7‐KCl, and release behaviour of KCl from VOGmC7‐KCl. We found that C interacts physically with VOG, increased the surface roughness of VOGm, and reduced the VOGm crystallite size. The addition of KCl into VOGmC7 reduced the pore size and increased the structural density of VOGmC7. The thickness and the C content of VOG affected its SR and WR. The addition of KCl into VOGmC7 reduced its SR, but did not significantly affect its WR.
The purpose of present work is to study the release kinetics of KCl from leached poly(vinyl alcohol)/glutaraldehyde (PVA/GA) hydrogelsinto demineralized water under various pH conditions. The PVA/GA hydrogels, which was prepared by mixing method, were leachedseveral times using demineralized water. The physico-chemical properties of the hydrogels were investigated using FT-IR and SEMtechniques. The release kinetics of KCl from the hydrogel into the demineralized water at various pH conditions and initial quantity ofKCl inside the hydrogel were studied using conductometric method. It was found that the trapped residual inside the hydrogel matrix can be well removed by repeated leaching. The pH of medium affects the rate of release and the amount of KCl at equilibrium conditions. The kinetics of KCl desorption into the media follows pseudo first-order kinetics, which indicates that the release kinetics is controlled by the initial amount of KCl in the PVA/GA matrix.