Lignocellulosic materials have been used as bioadsorbents for contaminants removal from industrial effluents due to their physical-chemical properties, renewable source, low-cost and efficiency that make them competitive to commercial activated carbon. The objective of this work is to develop an efficient and low cost bioadsorbent reusing the cashew nut shell (Anarcadium accidentale L), CNS, for the removal of metal ions (Cu2+ and Cr3+). The CNS was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), the point of zero charge (pHpzc) and the Boehm titration. The kinetics and adsorption equilibrium experiments were carried out in a monoelementary system, in batch runs at room temperature. The adsorption kinetics was evaluated by the mathematical models of pseudo first-order, pseudo second-order and intraparticle diffusion, while the adsorption isotherm was adjusted according to the Langmuir, Freundlich and Redlich-Peterson models. The removal percentage was 91% (Cu2+) and 96% (Cr3+) and adsorption kinetics was better adjusted to the pseudo second-order model, suggesting the predominance of chemisorption. The fit of the Langmuir isotherm was better for the experimental data of Cu2+ and Cr3+ ions, indicating adsorption in monolayers. It is concluded that the bioabsorbent produced from the cashew nut shell has a high potential for the removal of metals, in addition to being an abundant product in nature, is renewable and biodegradable and its reuse contributes to the reduction of environmental pollution, the production of waste and improves the local circular economy through the valorization of the byproduct.
12 September 2021 in Research, Society and Development
Materiais lignocelulósicos vem sendo estudados como possíveis adsorventes aplicados no tratamento de efluentes contendo íons metálicos. Um exemplo de material é a casca da Pachira aquatica que possui características favoráveis para o processo de biossorção. O presente estudo visou contribuir para os estudos de biossorção utilizando a Pachira aquática Aubl., investigando os fatores influentes no processo biossorção de Fe3+, Ni2+ e Cd2+ através do planejamento experimental. Foi utilizado o planejamento fatorial completo com três pontos centrais, utilizando quatro fatores com dois níveis cada (superior e inferior), totalizando 19 experimentos (24+3). O início dos experimentos se deu a partir da preparação do material bioadsorvente e das soluções metálicas, seguida da aplicação destes em ensaios de biossorção em batelada com variação dos fatores temperatura, pH, massa de bioadsorvente e concentração de adsorbato. Ao final dos ensaios obteve-se resultados satisfatórios para remoção dos íons metálicos principalmente quando os fatores pH, massa de bioadsorvente e concentração de adsorbato estavam em seus níveis superiores. O fator temperatura mostrou-se não significativo para adsorção de Fe3+ e Cd2+ e pouco significativo para Ni2+. Dessa forma a utilização do nível inferior de temperatura (30 °C) torna-se adequado, pois promovem processos mais econômicos. Utilizando os fatores em seus valores ótimos (mb=0,5g e ca=70mg/L) houve remoção de 100%, 99% e 100% de Fe3+, Ni2+ e Cd2+, respectivamente. Concluiu-se a partir dos resultados obtidos que o carvão vegetal produzido a partir da Pachira aquatica é eficiente para biossorção de Fe3+, Ni2+ e Cd2+.
28 March 2021 in Research, Society and Development
Chemical Looping Combustion (CLC) technology has emerged as a promising alternative capable of restricting the effects of global warming due to anthropogenic gas emissions, especially CO2, through its inherent capture. This study aims to synthesize and evaluate Cu-based oxygen carriers supported on natural materials such as diatomite and kaolin, through the incipient wet impregnation method for CLC process applications. Oxygen carriers were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), and scanning electron microscopy with surface energy dispersive x-ray spectroscopy (SEM-EDS). The mechanical strength of the two oxygen carrier particles was determined after the sintering procedure resulting in high crushing force. Reactivity of oxygen carriers was evaluated in a thermobalance with CH4 and H2 gases. Different reaction pathways were attempted when undergoing the redox cycles: total direct reduction of CuO to Cu0 for Cu-K and partial reduction of CuO to Cu2O and CuO to Cu-D. However, the highest reactivity and reaction rate was achieved in Cu-D due to the pore structure of diatomite, the chemical composition and the resulting interaction between CuO and the support. H2 gas reactivity tests showed a higher conversion rate and greater stability between cycles for both oxygen carriers. Thus, the reducible CuO content present in Cu-Diatomite during the reactivity test with H2 as the fuel gas was ideal for achieving high solids conversion, tendency for greater stability and a higher reaction rate.