Biofloc technology (BFT) is one of the most promising aquaculture cultivation methods in the modern aquaculture era because of its high efficiency level, especially in water and fodder use. Usually, the general condition of the biofloc can be known from the color of the water. By utilizing the vision sensor, BFT color identification can be done automatically, which helps cultivators find out their BFT system’s condition. In this research, a classification was made for the watercolor of the BFT Tilapia system based on the microbial community color index (MCCI) value and the initial cultivation conditions where algae and nitrifying bacteria had not developed significantly. The color classifications of the bioflocs are clear, green, browngreen, green-brown, and deep-brown. Clear color is the new classification to indicate BFT water conditions in the initial cultivation phase. Further, two computer vision algorithm methods are introduced to classify the color of BFT system water. The first method combines the B/W algorithm and MCCI calculations, while the second algorithm uses the Manhattan distance algorithm approach. From the experiments that have been carried out, both computer vision algorithms methods for classifying biofloc colors have shown promising results.
1 November 2025 in Indonesian Journal of Electrical Engineering and Computer Science
Cable-based tsunameters have been deployed in Indonesia under the name of the INA-CBT project. Currently, the system operated at the Labuan Bajo landing station works well and sends aggregated data from the seafloor sensors to a central or read down station in Jakarta for further processing. The current scheme makes use of a publish and subscribe indirect communication among the landing station (LS) as the publisher and various clients as subscribers for the sensor data. Message queue telemetry transport (MQTT) was selected as the application-layer protocol for implementing this communication scheme. This paper presents a measurement-based evaluation of the MQTT live performance by observing the MQTT messages’ latencies received at the subscriber of the INA-CBT’s MQTT broker. The results give insight on the general achievable performance of the INA-CBT communication system in providing reliable data for the tsunami detection system. Furthermore, the results obtained can be used as communication parameters for making a more realistic virtual testbed for designing a more appropriate and scalable CBT system.
In long-haul communication, fiber optic cable plays an important role as transmission medium. The C-Band is the typical spectrum used in common optical link implementation, especially for long-range. Generally, dense wavelength division multiplexing (DWDM) uses specific wavelength spectrum based on grid stated in ITU-T G.694.1 recommendation, in which it is proposed to acquire several wavelengths to be used as the channels in the system of DWDM communication-based sensor network. In this paper, C-band DWDM channel determination method is presented. The selected DWDM channels are determined by considering lower attenuation and chromatic dispersion in the G.652.D-based fiber optic from Corning SMF-28 fiber optic technical datasheet towards entire wavelength in C-Band area, thus the optimum channels could be discovered. As conclusion, our research found the attenuation parameter has much more significant effect to Q-factor and BER values compared to the chromatic dispersion effect and the top-five most optimized channels are listed.