Shuli Wang

Shuli Wang

Auto-generated profile, based on publicly available information

Shuli Wang

Eindhoven University of Technology, Department of Mechanical Engineering, Eindhoven, The Netherlands

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2015 in IFAC-PapersOnLine
Verified
Journal Article
Closed access
XLXi Luo
Xi Luo
SWShuli Wang
Shuli Wang
BJBram de Jager
Bram de Jager
FWFrank Willems
Frank Willems

16 November 2015 in Flow, Turbulence and Combustion
Verified
Journal Article
Open access
PDF file
SWShuli Wang
Shuli Wang
PBP. C. Bakker
P. C. Bakker
LSL. M. T. Somers
L. M. T. Somers
LGL. P. H. de Goey
L. P. H. de Goey
Partially Premixed Combustion (PPC) is a combustion concept that aims to provide combustion with low smoke and NOx emissions and a high thermal efficiency. Extending the ignition delay to enhance premixing, avoiding spray-driven combustion, and controlling temperature at an optimum level through use of suitable dilution levels has been recognized as a key factor to achieve such a concept. Fuels with high auto-ignition resistance do extend ignition delay. In this work three ternary blends of an alcohol (ethanol or n-butanol), n-heptane and iso-octane with a target research octane number (RON) of 70 are studied. RON70 was earlier found to be close to optimal for PPC over a large load range. The objective of this research is to analyze the sensitivity of the combustion parameters to changes in air-excess ratio when using these three blends. The engine was operated at 1250 rpm and 1000 bar injection pressure with a single injection strategy. Results revealed that efficiency was increased from rich to lean combustion, and these three blends show distinct premixed combustion even in lean PPC operation. The premixed fraction of combustion however reduces with the increase of air-excess ratio, which is especially apparent for PRF70 which consists of n-heptane and iso-octane alone.

1 January 2018 in Thermal Science
Verified
Journal Article
Open access
PDF file
SWShuli Wang
Shuli Wang
SSSimon Sprengers
Simon Sprengers
BSBart Somers
Bart Somers
GDGoey Philip De
Goey Philip De
Low temperature combustion using gasoline-like fuels has the potential to pro-vide high efficiencies and extremely low NOx and soot emissions. In this study, different volume percentages (30%~70%) of iso-octane, toluene, and n-butanol are blended with n-heptane separately. These blends with different composition ratios are tested on a modified single-cylinder research engine. Also, simulations are performed using a homogeneous reactor method to know the fuel-chemical effects on particulate matter emissions. Thirdly, a composition ratio of 70% is selected to perform further experiments based on the results from the initial composition ratio experiments with a focus on the particle size distributions. It was found that if the test fuel can provide sufficient ignition delay to allow fuel to premix with air fully, the soot emissions will be low and particle size is small even if the test fuel contains a lot of aromatic compounds.