The aeropendulum is a nonlinear system that consists of a rod equipped with a motorized propeller at one of its ends and connected to a pivot at its other end. This pivot receives a torsional moment through the aerodynamic effects generated by the propeller thrust force. From a control point of view, the aeropendulum is a plant that imposes a significant complexity on the design of controllers. In view of that, this system can be used in didactic observations and real applications of control theory concepts. This work presents the model identification and control of an aeropendulum system prototype. The model has as control input the voltage applied to the motor that drives the propeller and the rod angle as system output, measured by an incremental encoder. The identification process was conducted using the ident function of the Matlab® software. Based on the obtained model, an controller was designed to stabilize the system around the operating point, maintaining the rod in a specific position. A square wave was used as a reference for the angular variation of the rod to verify the controller's efficiency in tracking a required angular trajectory. Simulation and experimental tests were conducted to validate the obtained mathematical model and the controller design. The results confirmed that the considered methodology was satisfactory for the studied case.
19 October 2022 in Proceedings Xxii Congresso Brasileiro de Automática
In the study of control systems, a piece of equipment used in the literature is the Aeropendulum. This system consists of a pendulum-motor-propeller set coupled to a rotational axis, where the angular displacement of the pendulum happens due to the thrust force of the propeller. So, the motor-propeller set must be activated according to the desired angle for the pendulum. This work presents the construction of a didactic Aeropendulum prototype, which was developed at the Automation Laboratory of the Federal Institute of Paraná (IFPR) – Jacarezinho. After the building of the prototype, a linear model for the system was obtained by carrying out tests in open-loop configuration around an operating point and using the 'ident' tool of the Matlab® software. A tracking controller based on LQR was designed to stabilize the system and make the pendulum angle follow a step-like trajectory. Simulations and experiments with the prototype showed the effectiveness of the proposed strategy.
31 July 2020 in Journal of Control, Automation and Electrical Systems
The position control in electromechanical systems can many times be performed by direct current (DC) motors. Due to this, the control of these devices is studied via several control strategies in the literature. In this work, the modeling of a direct current motor with coupled load is presented, including the experiments performed to obtain the main system’s parameters and the dynamic’s discretization process. The discretization is taking into account in order to allow the controller to be performed by a computer. From the obtained model, the state feedback control approach along with an observer was explored to create a digital controller for the considered DC motor. The obtained results, both from the simulation and the experimental setup, show that the obtained model is valid. Moreover, it is possible to conclude that the proposed control strategy conducts to appropriate results both in simulations and in experimental tests.