1 July 2020 in 2D Materials
The World Health Organization reported that 4.2 million deaths every year were a direct result of exposure to ambient air pollution (NO 2 , SO 2 , NH 3 , CO 2 , CO, CH 4 ). There is a well-demonstrated global need for high sensitivity, low cost and low energy consumption miniaturised gas sensors to be deployed in a dense network and to be used in an attempt to pinpoint and avoid high pollution hot spots. The high sensitivity of graphene to the local environment has shown to be highly advantageous in sensing applications, where ultralow concentrations of adsorbed molecules induce a significant response on the electronic properties of graphene. This is commonly attributed to the π electrons of graphene, being directly exposed to the surrounding environment. The unique electronic structure makes graphene the ‘ultimate’ sensing material for applications in environmental monitoring and air quality. In this review, we present the frontiers of graphene-based sensors considering both electrical and optical methods of detection and discuss the topical progress in an attempt to establish whether graphene can be considered as the ideal sensing material. We pay special attention to the optimization of the sensor performance, using various graphene hybrids and doping mechanisms. Furthermore, we present the recent developments in other 2D material-based sensors that have followed in the wake of graphene. We discuss the benchmarked parameters of graphene sensors, such as sensitivity, selectivity, response/recovery time and detection limit, and compare them with other 2D materials as well as existing state-of-the-art sensors currently being used in the field. We also perform a brief market analyses for the environmental sensing industry as well as provide a Strengths—Weaknesses—Opportunities—Threats analysis of graphene technology for environmental sensing.
20 September 2017 in ACS Applied Materials & Interfaces
5 December 2018 in Nature Communications
Graphene has emerged as a promising material for optoelectronics due to its potential for ultrafast and broad-band photodetection. The photoresponse of graphene junctions is characterized by two competing photocurrent generation mechanisms: a conventional photovoltaic effect and a more dominant hot-carrier-assisted photothermoelectric (PTE) effect. The PTE effect is understood to rely on variations in the Seebeck coefficient through the graphene doping profile. A second PTE effect can occur across a homogeneous graphene channel in the presence of an electronic temperature gradient. Here, we study the latter effect facilitated by strongly localised plasmonic heating of graphene carriers in the presence of nanostructured electrical contacts resulting in electronic temperatures of the order of 2000 K. At certain conditions, the plasmon-induced PTE photocurrent contribution can be isolated. In this regime, the device effectively operates as a sensitive electronic thermometer and as such represents an enabling technology for development of hot carrier based plasmonic devices.
22 July 2016 in Scientific Reports
We report a CVD hexagonal boron nitride (hBN-) assisted transfer method that enables a polymer-impurity free transfer process and subsequent top encapsulation of large-area CVD-grown graphene. We demonstrate that the CVD hBN layer that is utilized in this transfer technique acts as a buffer layer between the graphene film and supporting polymer layer. We show that the resulting graphene layers possess lower doping concentration and improved carrier mobilities compared to graphene films produced by conventional transfer methods onto untreated SiO2/Si, SAM-modified and hBN covered SiO2/Si substrates. Moreover, we show that the top hBN layer used in the transfer process acts as an effective top encapsulation resulting in improved stability to ambient exposure. The transfer method is applicable to other CVD-grown 2D materials on copper foils, thereby facilitating the preparation of van der Waals heterostructures with controlled doping.
17 May 2018 in 2D Materials
We use a contactless microwave dielectric resonator gas sensing platform to study the adsorption dynamics of NO 2 gas present in air onto a graphene surface. The use of microwaves removes the need for metal contacts that would otherwise be necessary for traditional conductivity measurements, and therefore allows non-invasive determination of NO 2 concentrations to sub parts per million. As a result, gas−metal interactions and localised graphene doping in the vicinity of metal contacts are eliminated, with the advantage that only graphene−gas adsorbate interactions are responsible for the measured signal. We show that the sensor response for all considered concentrations can be described using a surface coverage dependent Langmuir model. We demonstrate that the possible variation of the NO 2 binding energy, which is frequently considered as the main parameter, plays only a secondary role compared to the rising adsorption energy barrier with increasing NO 2 coverage. The continuous distribution of the properties of the graphene adsorption sites used in the theoretical model is supported by our Kelvin probe and Raman surface analysis. Our results demonstrate that the non-invasive microwave method is a promising alternative platform for gas sensing. Moreover it provides valuable insights towards the understanding of the microscopic processes occurring in graphene based gas sensors, which is a key factor in the realization of reproducible and optimized device properties.
19 May 2023 in Journal of the Optical Society of America B
Source identification and accurate measurements of methane gas concentration are key tools necessary for climate change management. Here we present a method for methane isotopologue ratio measurement using a laser-based frequency modulation (FM) spectroscopy technique in the near infrared at 1661 nm. We provide line shape analysis and discuss a fitting algorithm for accurate isotopologue ratio metrology and investigate and minimize the effects of residual amplitude modulation on the experimentally produced FM signal line shape. This FM technique is further evaluated for future development of a cavity-enhanced and noise-immune system capable of isotopologue ratio as well as ultrasensitive trace gas measurements, all accessible using a single distributed feedback laser.