3 January 2023 in Journal of Materials Chemistry A
The integration of electrochromic properties, energy storage, and mechanical flexibility in a multifunctional wearable electronic device is highly desirable yet challenging. Herein, we demonstrate a simple and scalable galvanic-driven strategy to deposit large-area Prussian Blue (PB) films on both rigid and flexible substrates. A flexible PB/Zn battery-type electrochromic device with multiple functions, including a flexible power source and capacity depletion visualization, was constructed. The finely tuned flexible electrochromic device exhibited excellent properties with a large optical contrast (ΔT700 nm = 68.3%), high coloration efficiency (117.2 cm2 C−1), rapid switching (4.7 s/7.5 s for coloring/bleaching), and long-operation stability (>1000 cycles). The device also showed excellent flexibility and preserved the electrochromic properties under rigorous bending conditions. Therefore, the PB/Zn device can serve as a flexible power source with large capacity and good durability. Moreover, the discharge state of the battery can be monitored real time visually through the electrochromic changes. This work offers insights into the development of multifunctional smart devices toward real-world applications.
28 June 2024 in Energy & Environmental Science
Substrate cooling strategy generates a more stable FAPbI 3 -solvent intermediate and suppresses its transition to δ-FAPbI 3 , enabling ultra long process window up to 3 hours and efficient solar module.
29 August 2025 in Nature Communications
Wide-bandgap (WBG) perovskite solar cells (PSCs) can exceed the Shockley–Queisser limit in tandem solar cells (TSCs), but phase segregation under continuous illumination limits their stability. Using in-situ microscopic characterizations, we investigate the dynamics of photon-induced phase segregation. Initial light soaking drives iodide diffusion into a metastable state, but continued redistribution increases the phase separation energy barrier, resulting in a more stable, segregation-resistant state. Inspired by stabilization methods in silicon photovoltaics, we develop the Photo-Homogenization Assisted Segregation Easing Technique (PHASET), which combines light soaking with 2-ThEABr surface passivation to suppress halide segregation. PHASET enhances efficiency and stability, enabling an efficiency of 20.23% for 1.79 eV WBG-PSCs, with 97% of the initial efficiency retained after 1200 hours of continuous illumination. Integration with a 1.25 eV narrow-bandgap subcell results in a two-terminal all-perovskite TSC with 28.64% efficiency, retaining 77% of its initial performance after 1200 hours of maximum power point tracking.
7 October 2022 in Dalton Transactions
The oxygen evolution reaction (OER) and alternative urea oxidation reaction (UOR) are both important half reactions correlated with hydrogen production. Transition metal based catalysts with double metal composition exhibit excellent electrocatalytic performance for the OER or UOR due to their synergetic effect and coupling of different active sites. However, the development of OER/UOR bifunctional electrocatalysts is unsatisfying and the role of each metallic active site in the OER and UOR is still unclear. Herein, we report a Fe–Mn based OER and UOR bifunctional catalyst through a simple one-step electrodeposition method. For the OER, the introduction of Mn improves the conductivity of the catalysts and fine-tunes the electron density of the Fe active sites. For the UOR, both Fe and Mn act as active sites and their coupling effect further improves the UOR activity. The catalyst with the optimal Mn/Fe ratio achieved an overpotential of 237 mV for the OER and a potential of 1.35 V for the UOR at 100 mA cm−2. This study provides a simple synthesis protocol for constructing bifunctional catalysts for green hydrogen production.
29 January 2022 in Solar RRL
7 February 2023 in Journal of Materials Chemistry A
The photovoltaic performance of perovskite solar cells (PSCs) is determined by the morphology and optoelectronic properties of perovskite films. The Ostwald ripening process is a promising strategy to enhance the quality of perovskite films. Herein, a novel solvent bath annealing (SBA) treatment is developed to introduce Ostwald ripening of perovskite films in a liquid-phase solvent bath. A mixed solvent containing a poor solvent and a small amount of good solvent for perovskite is the key to inducing perovskite grain growth during SBA treatment. During the SBA process, the diffusion length of the perovskite–solvent complex is extended by the poor solvent liquid, which allows the grain size to increase significantly from 100 to 600 nm, accompanied by improved crystallinity. The SBA process further enables defect passivation and hydrophobic modification of the perovskite film when 1H,1H-perfluorooctylamine additive is added in the solvent bath. The carrier lifetime was improved from 137 to 428 ns due to the reduced defect density. Therefore, the power conversion efficiency (PCE) of PSCs is improved from 18.43% to 20.86% by the SBA process. The device retained 86% of its initial PCE after exposure to a high humidity environment (RH = 85%) for 300 h. Our work exhibits a promising strategy for large-scale modification of perovskite films for efficient PSC fabrication.