1 January 2021 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. To establish analytical dependences for calculating the characteristics of the ash suspension and the velocity of constrained settling of coal and quartz depending on the particle size and density of the medium, which is necessary for calculating the design and determining the operating modes of hydraulic devices for extracting coal from water mineral suspension of fly ash from thermal power plants. Methodology. The research was carried out on the basis of a cellular suspension model and classical concepts of constrained particle motion in laminar and turbulent flow. For analytical evaluation of the characteristics of the suspension, the defining correlations and the Wend formula for viscosity were used. The Ergun equation and correlation analysis methods were used to calculate and analyze the speed of constrained movement of ash suspension particles. Findings. Approximating nonlinear functions are obtained for determining the speed of constrained movement of coal and quartz particle size up to 4 mm in an ash suspension with a density of 1.31.8 g/cm3. It is shown that, for both settling and ascending of coal, there is a direct relationship between the velocity and particle size, in both cases it is nonlinear. For any coal size, the speed of ascent depending on the suspension density is of extreme nature; the rational density range is 1.551.8 g/cm3 with a maximum of 1.65 g/cm3. The established dependencies allow us to determine the size of coal and quartz particles, taking into account the counter-flow of the liquid phase, as well as the boundary size. Originality. For the regime of weak-turbulence flows there were established dependences and approximation equations of the constrained movement speed of coal and quartz particles the main components of the water suspension of fly ash from the Novo-Kramatorska TPP, depending on the size and density of the ash suspensions with changes in the characteristics of the medium depending on density. The frames of the Stokes description of processes are established. It is shown that the movement of the liquid phase in a counter-flow with precipitating particles is effective for surfacing of thin coal classes. Practical value. The described approach can be used for analytical evaluation of the characteristics and velocity of constrained movement in various water suspensions of discrete solid particles in weak-turbulence flows. The advantage is a wider coverage of hydraulic equipment operating modes. The results obtained are necessary for designing and determining the technological modes of operation of various hydraulic devices in the technology of complex processing of fly ash from TPPs.
1 January 2022 in Geo-Technical Mechanics
IUInstitute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine
Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
1 January 2023 in Geo-Technical Mechanics
MUM.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
Recycling of ash and slag waste from thermal power plants is an important environmental and economic task. The widespread use of ash in construction is mainly hindered by the high content of unburned carbon. The fine granulometric composition of the ash makes most mechanical methods of recycling and flotation ineffective, and is the most effective, environmentally friendly, and cheapest method is hydraulic separation. It allows for the recovery of about 70% of construction raw materials, in which the carbon content is reduced to regulatory commercial values, from 20% in raw ash to 5–10%. A central element of hydraulic separation research is establishing the hydraulic characteristics of the fly ash, with a special focus on determining its actual density, considering that the ash includes more than 10 different mineral components that have also undergone high-temperature transformation. Theoretical determination of the solid phase density of a multi-component mixture does not yield a reliable result. This article examines methods for determining bulk, true, and actual density, experimental approaches to their measurement, and the impact of various factors on these parameters. Correct density determination underlies the calculation of hydraulic characteristics of ash suspensions, the speed of hydraulic flows, and the efficiency of extracting individual components by way of hydroclassification and hydroseparation. The purpose of the research is to refine the methodology and experimentally determine the density of the solid phase of fly ash in its natural state and ash classified by size -240+40 µm, -40+0 µm, using the sample of ash from Pridniprovska TPP. The results of this work are significant for engineering when creating new technologies, for hydraulic devices recycling ash aimed at minimizing environmental impact and optimizing the use of technogenic resources. It was found that the density of the solid phase of ash from the ash dump of Pridniprovska TPP varies from 1.783 g/cm³ to 2.3, averaging 2.0 g/cm³. Variations in density are related to the inhomogeneity of the chemical composition, the presence of closed cavities in the particles. Keywords: fly ash, ash and slag waste.
1 January 2025 in Geo-Technical Mechanics
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
1 January 2025 in Geo-Technical Mechanics
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
1 January 2024 in Geo-Technical Mechanics
MUM.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
The settling velocity of particles in mineral suspensions is a crucial parameter for calculating the design of various hydraulic devices and equipment used for mineral pulp benefication. In studies of gravity separation of heterogeneous particles by settling, the determination of mass settling velocity, the influence of suspension density on the process, and the applicability of classical hydrodynamics laws remain the least explored aspects. Often, free settling conditions are used for calculating hydraulic separation processes, but this introduces significant error in the velocity magnitude, as, in practice, the process occurs under constrained conditions. The purpose of this work was to analyze the patterns of constrained settling using the example of coal particle settling in fly ash suspensions from thermal power plants. The article employs an original method for calculating the characteristics of suspensions and the velocity of constrained settling depending on the density. Experimental data on the mass settling velocity of natural fly ash are presented, which indicate the order of velocities and give grounds for the velocity calculation. Given the fine particle size of the ash, the main focus was on the settling of fine coal in the ash. The analysis covered a database in which the characteristics of suspensions and the velocity of constrained coal settling were determined by varying the density of the ash suspension from 1.05 g/cm³ to 1.3 g/cm³ and the size of the settling coal from 0.01 mm to 4 mm. The database was analyzed using the Reynolds number and the applicability of Stokes' law and Lyashenko's law. It was found that the more dilute is the suspension, the smaller is the particle size that follows Stokes' law, and the smaller is the range of particle sizes that Stokes' law covers, and vice versa. For fine coal fractions of 0.001–0.1 mm, the numerical coefficient in Stokes' law decreases according to an inverse power law depending on the pulp density. The ratio of free to constrained settling velocities decreases according to a power law, similar to Lyashenko's law for porosity. The conducted research expands scientific understanding of the processes of constrained settling, facilitates engineering calculations when designing hydraulic devices, and optimizes their operational modes.