Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
The aim of this study is to develop analytical dependencies for the uniaxial stiffness of a spatial composition of elastic balls of same diameter, considering its volumetric structure. A review of the literature was conducted regarding types of ball packings that have practical applications for describing the structure of crystals, composite materials, and ball mill loadings of various types. For calculating the stiffness of a three-dimensional composition of balls, the study is based on G. Hertz's theory of elastic ball contact. According to this theory, the relationship between compressive force and the center-to-center displacement of balls is nonlinear with an exponent of 1.5. By spatially combining individual ball contacts, the nonlinear stiffness for simple cubic and face-centered cubic packings of balls under uniaxial compression was determined. These packing types were chosen as boundary cases of regular ball packings: the former as the least dense possible packing and the latter as the densest. Initially, the stiffness of a single layer of ball packing in a plane perpendicular to the compression force was determined by summing the parallel-connected stiffnesses of all balls. Next, the total stiffness of the spatial composition of balls compressed between two massive plates was calculated through sequential combination of the stiffnesses of all single layers along the height of the composition. Differences in the stiffness of elemental ball contacts, both between themselves and with the bounding plate layer, were taken into consideration. As a result, formulas were derived for determining the uniaxial stiffness of the spatial ball composition for the two boundary packing types, depending on the elastic properties of the ball material and massive boundaries, the ball diameter, and the dimensions of the deformed ball composition. The comparison of packing stiffnesses did not account for the friction coefficient due to its minor influence and its significant reduction under conditions of vibration or the presence of liquid at ball contacts. It was concluded that, firstly, the stiffness of a ball composition in a face-centered cubic packing slightly exceeds that of a simple cubic packing, within the permissible error margins of engineering calculations. Secondly, the formulas for face-centered cubic ball packing are more suitable for practical calculations. Thirdly, the results of the study can be used for modeling the stress-strain state of technological ball loadings in vibratory, planetary, and other types of mills; for modeling the behavior of layers made of solid bulk materials with approximately isometric particle shapes; and for determining the elasticity of frames in composite material fillers with significant differences in the elastic properties of their components.
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.
This study investigated the effect of grinding media mass on the dynamics and force parameters of a vibration mill with multi-frequency vibro-impact excitation. Based on a mathematical model of a vibrating mill with multi-frequency vibro-impact excitation, the influence of the mass of the grinding media in the grinding chamber on the grinding process and mill dynamics was investigated. It was established that increasing the mass of the grinding ball layers increases both the number and magnitude of impact interactions, including the impacts of the media layers against the inner chamber surfaces and interactions between grinding balls within the layers. This provides conditions for intensifying material breakage by generating high contact stresses on the material particles. Increasing the grinding-media mass leads to an increase in chamber acceleration only during impact interactions with the process medium, whereas the chamber acceleration during oscillation stages without contact with the grinding media changes only slightly, as does the acceleration of the mill-drive frame. This dynamic behavior contributes to the stability of the milling regime over a wide range of grinding media masses. Overall, the system operates in a deterministic-chaos regime, generating a broad spectrum of impact frequencies that promote intensive mixing and material disintegration. The occurrence of intensive micro-impacts and high contact stresses makes the investigated mill particularly suitable for the fine and ultrafine grinding of brittle and hard-to-grind materials. Full-scale tests of the developed industrial prototype using titanium–zirconium concentrates confirmed the rapid achievement of high product fineness, with the fraction below 10–20 μm reaching more than 61–88% after 40 min of grinding time.
Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.