The problem of vehicle–guideway coupled self-excited vibration is common in maglev train systems, which has a serious impact on the stability of maglev trains. The lower the track stiffness, the more likely it is to occur, the greater the harm to the maglev system, and the greater the difficulty in suppressing the vibration. To solve this problem, many conventional control schemes rely on the estimation of electromagnetic forces. However, considering the magnetic leakage flux in the suspension air gap and other reasons, the empirical electromagnetic force model is inaccurate, which increases the difficulty of suspension control under low track stiffness. Therefore, a more accurate electromagnetic force model based on least squares fitting is proposed in this paper, which can estimate the electromagnetic force more accurately without increasing the computational cost. On this basis, a control scheme based on feedback linearization theory was designed, and the control effect was tested on an experimental platform with low track stiffness. The experimental results showed that the proposed control scheme could achieve stable suspension with low track stiffness and could effectively solve the vehicle–guideway coupled vibration problem with a strong anti-interference ability. The research in this paper is of great significance for solving the problem of vehicle–guideway coupled vibration under low track mass/stiffness, which is believed to be used in the light-weight girders in the next generation of commercial maglev systems. This work also has an important reference value for suspension control algorithms based on electromagnetic force feedback.
The vehicle–guideway coupled self-excited vibration of maglev systems is a common control instability problem in maglev traffic while the train is suspended above flexible girders, and it seriously affects the suspension stability of maglev vehicles. In order to solve this problem, a nonlinear dynamic model of a single-point maglev system with elastic track is established in this paper, and a new and more stable adaptive backstepping control method combined with magnetic flux feedback is designed. In order to verify the control effect of the designed control method, a maglev vehicle–guideway coupled experimental platform with elastic track is built, and experimental verifications under rigid and elastic conditions are carried out. The results show that, compared with the state feedback controller based on the feedback linearization controller, the adaptive backstepping control law proposed in this paper can achieve stable suspension under extremely low track stiffness, and that it shows good stability and anti-interference abilities under elastic conditions. This work has an important meaning regarding its potential to benefit the advancement of commercial maglev lines, which may significantly enhance the stability of the maglev system and reduce the cost of guideway construction.