The vehicle–guideway coupled self-excited vibration of maglev systems is a common control instability problem in maglev traffic while the train is suspended above flexible girders, and it seriously affects the suspension stability of maglev vehicles. In order to solve this problem, a nonlinear dynamic model of a single-point maglev system with elastic track is established in this paper, and a new and more stable adaptive backstepping control method combined with magnetic flux feedback is designed. In order to verify the control effect of the designed control method, a maglev vehicle–guideway coupled experimental platform with elastic track is built, and experimental verifications under rigid and elastic conditions are carried out. The results show that, compared with the state feedback controller based on the feedback linearization controller, the adaptive backstepping control law proposed in this paper can achieve stable suspension under extremely low track stiffness, and that it shows good stability and anti-interference abilities under elastic conditions. This work has an important meaning regarding its potential to benefit the advancement of commercial maglev lines, which may significantly enhance the stability of the maglev system and reduce the cost of guideway construction.
Maglev transportation is a new type of rail transit, whose vehicle is different from the two-bogie structure of the wheel-rail train. Generally, it consists of four to five suspension frames supporting a car body in parallel. The moving mechanism of a vehicle often consists of hundreds of moving parts, showing a multi-rigid body system in serial-parallel structure. At present, there is no theoretical framework for systematically and accurately describing the kinematics and dynamics of the Maglev train. The design work is at the level of simple equivalent estimation or measurement from the CAD drawing, which makes the system performance analysis and optimization work unable to be carried out scientifically. Based on the theoretical framework of screw theory and exponential mapping, the forward kinematics modeling, inverse kinematics solution, transition curve modeling and computational analysis methods for the Maglev train are proposed in this paper. A systematic and accurate theoretical framework is constructed for the modeling and analysis of the motion mechanism of the Maglev train, which makes the design and analysis of the Maglev train at the scientific level.
Permanent magnet linear synchronous motors (PMLSMs) with stator segmented structures are widely used in the design of high-power propulsion systems. However, due to the inherent delay and segmented structure of the systems, there are parameter disturbances in the inductance and flux linkage of the motors. This makes the deadbeat predictive current control (DPCC) algorithm for a current loop less robust in the control system, leading to a decrease in control performance. Compensation methods such as compensation by observer and online estimation of parameters, are problematic to apply in practice due to the difficulty of parameter adjustment and the high complexity of the algorithm. In this paper, a robustness-improved incremental DPCC (RII-DPCC) method—which uses incremental DPCC (I-DPCC) to eliminate flux linkage parameters—is proposed. The stability of the current loop was evaluated through zero-pole analysis of the discrete transfer function. Current feedforward was introduced to improve the stability of I-DPCC. The inductance stability range of I-DPCC was increased from 0.8–1.25 times to 0–2 times the actual value, and the theoretical stability range was increased more than 4 times, effectively improving the robustness of the predictive model to flux linkage and inductance parameters. Finally, the effectiveness of the proposed method was verified through numerical simulation and experiment.
In recent years, more and more countries are paying attention to maglev transportation because of its outstanding advantages. However, because the structure of a maglev train is more complex than a wheel-rail train, there is no systematic theory method for kinematic modeling of a maglev vehicle. Based on the screw theory and the product of exponentials (PoE) formula in the field of open-chain robotics, this paper presents a method of kinematic mathematical modeling and analysis for a maglev train and track. By analyzing the characteristics of the closed chain running mechanism of a maglev train, the kinematic mathematical model of a maglev train and track is established, and the motion state of each moving part of the vehicle on a typical track is calculated and analyzed. At last, compared with the results of experiment, the correctness of modeling method proposed in this paper is verified.
Sensorless position and speed estimation methods for permanent magnet synchronous motors (PMSMs) eliminate the need for mechanical sensors, thereby reducing costs, enhancing reliability, minimizing system volume, and enabling maintenance-free operation. Furthermore, these approaches achieve high-precision control and exhibit strong adaptability to harsh environments. Particularly in medium- and high-speed operations, sensorless schemes based on the nonsingular fast terminal sliding mode observer (NFTSMO) offer strong robustness and rapid convergence. However, inherent speed chattering increases speed fluctuation and introduces adverse harmonic distortions in the estimation system. To address this, this paper proposes an improved observer strategy based on complex-vector reconstruction. This method formulates a reduced-order system model in the complex domain and constructs an isotropic sliding-mode surface, effectively suppressing the odd harmonics induced by the algorithmic structure. Additionally, a nonlinear tracking differentiator (TD) is introduced to filter out high-frequency noise from the estimated position and speed signals. Simulation and experimental results demonstrate that, compared to the conventional NFTSMO, the proposed method mitigates high-frequency chattering and improves speed estimation accuracy in medium- and high-speed sensorless operations, while maintaining comparable position tracking accuracy and convergence speed.