Understanding the generation of third body particles and their contribution to the formation of tribofilms of MoSx thin films is still challenging due to a large number of influencing factors. Besides the structure of the as-deposited MoSx films, the environment and the conditions during the Ball-on-disk tests affect tribofilms and thus the friction. Therefore, the influence of the surface pressure and sliding velocity in air, argon and nitrogen environments on the generation of the third body particles and the tribofilm formation of randomly oriented MoSx films is investigated. A high surface pressure is one major factor to achieve low friction, especially under humid conditions, which is important considering the use in industrial applications, for example dry-running screw machines. However, the mechanisms leading to that frictional behavior are still affected by the surrounding environment. While low friction is caused by a more extensive tribofilm formation in air, in argon and nitrogen, large size third body particles dispensed all over the contact area contribute to a lower friction. Raman scattering reveal a different chemistry of these particles reflected in the absence of laser- or temperature-induced surface oxidation compared to the as-deposited film and the wear track. The Raman scattering results are discussed with respect to the wear particle size, its chemical reactivity and strain-induced bonding changes.
Amorphous carbon (a-C) attracts great attention in tribology research and thin film technologies due to its versatile properties. However, high temperatures and mechanical stresses may cause significant changes in the structural ordering of the a-C network. We present an optical method to initiate structural ordering and to probe solid-to-solid structural transitions of element modified a-C films. A pulsed pump laser introduces heat into the film in a controlled manner, while a second laser probes confocally the first- and second-order Raman scattering signatures of the a-C network. For low pump power, the number of defects and non-sixfold aromatic rings is reduced. A further increase in the laser power leads to sharply evolved changes in the Raman scattering features, indicating a transition from a-C to defected graphite and an effusion of hydrogen. Moreover, graphite-dominant defect relaxation and an enhancement in hexagonal lattice areas occur and, in turn, activate second-order Raman scattering lines. A rising laser power subsequently results in progressive graphitization. Chemical modification of the films with Si or Cu enhances their thermal stability and even shifts the upper thermal limit of the film ablation, while the a-C:W film demonstrates a more efficient enrichment of nanocrystalline graphitic clusters.
14 December 2021 in Journal of Materials Engineering and Performance
Modifying MoS2 thin films by additional elements shows great potential in order to adjust the property profile and to meet the increasing requirements regarding high wear resistance and low friction properties of industrial components. Within that context, MoSx:N:Mo thin films were deposited by a reactive hybrid dcMS/HiPIMS process. By systematically increasing the Mo target cathode power, an investigation of the structural and the mechanical properties was conducted to understand the evolution of the tribological behavior. A low Mo target cathode power of 1 kW is related to the formation of the preferential (002) MoS2 basal-plane and thus a low friction with µ = 0.2. With an increasing amount of Mo, the film loses its solid lubricant MoS2 properties and a nitride constitution of the thin film is developing due to the formation of crystalline Mo and MoN phases. Related to this transformation, the hardness and elastic modulus are increased, but the adhesion and the tribological properties are impaired. The film loses its plasticity and the generated film material is directly removed from the contact area during the sliding contact.