1 April 2020 in IEEE Internet of Things Journal
8 May 2023 in Journal of Intelligent Manufacturing
The wear state of the punch in sheet-metal stamping processes cannot be directly observed, necessitating the use of indirect methods to infer its condition. Past research approaches utilized a plethora of machine learning models to infer the punch wear state from suitable process signals, but have been limited by the lack of industrial-grade process setups and sample sizes as well as their insufficient interpretability. This work seeks to address these limitations by proposing the sheared surface of the scrap web as a proxy for the punch wear and modeling its quality from acoustic emission signals. The experimental work was carried out in an industrial-grade fine blanking process setting. Evaluation of the model performances suggests that the utilized regression models are capable of modeling the relationship between acoustic emission signal features and sheared surface quality of the scrap webs. Subsequent model inference suggests adhesive wear on the punch as a root cause for the sheared surface impairment of the scrap webs. This work represents the most extensive modeling effort on indirect punch wear monitoring in sheet-metal stamping both from a model prediction and model inference perspective known to the authors.
9 July 2022 in Journal of Intelligent Manufacturing
Monitoring systems in sheet metal forming cannot rely on direct measurements of the physical condition of interest because the space between the die component and the material is inaccessible. Therefore, in order to gain further insight into the forming or stamping process, sensors must be used to detect auxiliary quantities such as acoustic emission and force that relate to the physical quantities of interest. While it is known that changes in force data are related to physical parameters of the process material, lubricant used, and geometry, the changes in data over large stroke series and their relationship to wear are the subject of this paper. Previously, force data from different wear conditions (artificially introduced into the system and not occurring in an industry-like environment) were used as input for clustering and classifying high and low wear force data. This paper contributes to fill the current research gap by isolating structural properties of data as indicators of wear growth to quantify the wear evolution during ongoing production in industry-like scenarios. The selected methods represent either established methods in sheet metal forming force data analysis, dimensionality reduction for local structure separation or generic feature extraction. The study is conducted on a set of four experiments with each containing about 3000 strokes.
1 June 2021 in IOP Conference Series: Materials Science and Engineering
The amount of information contained in process signals such as acoustic emission and force signals has proven vital for the detection of changes in physical conditions or quality feature prediction in sheet metal forming applications. Both signal types have also been researched in the context of wear detection, yet systems that reliably identify the wear state at a given time in sheet metal forming processes based on these signals do not exist. This paper proposes an architecture to assess the wear increase within a given time frame in an experiment based on an autoencoder. The ability of autoencoders to encode and decode signals has been widely studied and this approach leverages the fact that autoencoders are more likely to learn representative encodings on stable and homogeneous signals than on heterogeneous signals with high fluctuations. This approach utilizes the circumstance that high tool wear leads to changes in the signal and signal fluctuation. In consequence, autoencoders can be utilized to track tool wear progression without the need for labelled data. The findings show a strong similarity to physical models for the wear progression of tool components, indicating the validity of this approach. Additionally, an analysis of the signals yields characteristic effects of the considered force signals that could specifically represent wear resistance.
19 April 2023 in Materials Research Proceedings
Monitoring of fluctuating material properties for optimizing sheet-metal forming processes: a systematic literature review ORTJOHANN Lucia, BECKER Marco, NI