7 July 2020 in Physical Review Applied
() thin films having a thickness of several nanometers and showing both strong perpendicular magnetic anisotropy (PMA) and low magnetic damping are reported. The films are deposited by magnetron sputtering at room temperature first and then annealed in at high temperature. The substrates are , which share the same crystalline structure as , but have a lattice constant slightly larger than that of ; the lattice mismatching gives rise to an out-of-plane compressive strain and PMA in the films. The PMA is confirmed by vibrating sample magnetometer, magneto-optical Kerr effect, anomalous Hall effect, and angle-dependent ferromagnetic resonance (FMR) measurements. The damping of the films is analyzed through frequency-dependent FMR measurements. As an example, an 8-nm-thick film shows an effective PMA field of about 2800 Oe, a nearly square hysteresis loop, and a damping constant of only . As an illustration of possible applications of such films in spintronic devices, current-induced switching of the magnetization of the PMA films is demonstrated by the use of / bilayered Hall bar devices.
16 July 2024 in Nature Communications
Magnons, bosonic quasiparticles carrying angular momentum, can flow through insulators for information transmission with minimal power dissipation. However, it remains challenging to develop a magnon-based logic due to the lack of efficient electrical manipulation of magnon transport. Here we show the electric excitation and control of multiferroic magnon modes in a spin-source/multiferroic/ferromagnet structure. We demonstrate that the ferroelectric polarization can electrically modulate the magnon-mediated spin-orbit torque by controlling the non-collinear antiferromagnetic structure in multiferroic bismuth ferrite thin films with coupled antiferromagnetic and ferroelectric orders. In this multiferroic magnon torque device, magnon information is encoded to ferromagnetic bits by the magnon-mediated spin torque. By manipulating the two coupled non-volatile state variables—ferroelectric polarization and magnetization—we further present reconfigurable logic operations in a single device. Our findings highlight the potential of multiferroics for controlling magnon information transport and offer a pathway towards room-temperature voltage-controlled, low-power, scalable magnonics for in-memory computing.
29 July 2022 in Science Advances
The spin-momentum locking of surface states in topological materials can produce a resistance that scales linearly with magnetic and electric fields. Such a bilinear magnetoelectric resistance (BMER) effect offers a new approach for information reading and field sensing applications, but the effects demonstrated so far are too weak or for low temperatures. This article reports the first observation of BMER effects in topological Dirac semimetals; the BMER responses were measured at room temperature and were substantially stronger than those reported previously. The experiments used topological Dirac semimetal α-Sn thin films grown on silicon substrates. The films showed BMER responses that are 10 6 times larger than previously measured at room temperature and are also larger than those previously obtained at low temperatures. These results represent a major advance toward realistic BMER applications. Significantly, the data also yield the first characterization of three-dimensional Fermi-level spin texture of topological surface states in α-Sn.
26 April 2023 in Nature Communications
We present room-temperature measurements of magnon spin diffusion in epitaxial ferrimagnetic insulator MgAl0.5Fe1.5O4 (MAFO) thin films near zero applied magnetic field where the sample forms a multi-domain state. Due to a weak uniaxial magnetic anisotropy, the domains are separated primarily by 180° domain walls. We find, surprisingly, that the presence of the domain walls has very little effect on the spin diffusion – nonlocal spin transport signals in the multi-domain state retain at least 95% of the maximum signal strength measured for the spatially-uniform magnetic state, over distances at least five times the typical domain size. This result is in conflict with simple models of interactions between magnons and static domain walls, which predict that the spin polarization carried by the magnons reverses upon passage through a 180° domain wall.
29 April 2019 in IEEE Magnetics Letters
Previous experiments have shown that perpendicular magnetic anisotropy (PMA) in tri-layers consisting of a CoFeB layer, an MgO layer, and a nonmagnetic metal (NM) layer depends strongly on whether the CoFeB layer was grown on the top of NM layer or was capped a NM layer. In this work, we studied the physical origin of this phenomenon through first-principles calculations. We took MgO/CoFe/Ta and Ta/CoFe/MgO as model structures and analyzed the magnetic anisotropy energy (MAE) therein. We found that the ‘substrate/Ta/CoFe/MgO’ structure had a notably higher MAE than the ‘substrate/MgO/CoFe/Ta’ structure. This difference results mainly from different stresses in the Ta layers, and the latter gives rise to a difference in the hybridization strength of in-plane orbits ( $d_{xy}$ , $d_{x^{2}-y^{2}}$ , $p_{x}$ , and $p_{y}$ ). We also found that the $p$ orbital hybridization in the Ta layers contributes significantly to the PMA in both structures.
1 March 2020 in Journal of Magnetism and Magnetic Materials