4 February 2021 in IEEE Transactions on Applied Superconductivity
The toroidal field (TF) coil is a crucial system in the tokamak, which provides the main magnetic field to confine the plasma. One TF coil of the China Fusion Engineering Test Reactor (CFETR) will be constructed with the support of the Chinese government in the next five years. In order to study the quench behavior of the CFETR TF coil, the assumed quench initiation at the maximum and minimum temperature margin position of the TF coil is analyzed, and the effect of the quench detection threshold on the hot spot temperature is studied. It is found that 0.5 V quench detection voltage leads to hot spot temperature above 250 K in the low-field region. In order to meet the design criteria of the hot spot temperature, the quench detection voltage should be less than 0.2 V.
17 April 2024 in IEEE Transactions on Applied Superconductivity
The Central Solenoid Model Coil (CSMC) has been manufactured as part of the R&D projects for the China Fusion Engineering Test Reactor (CFETR), and it will undergo testing in the second half of 2024. For the safety operation of magnet, predictive analyses are required to study thermal-hydraulic behavior of the CSMC during the quench. In this paper, the different quench initial position is detailed studied, for example, quench initiates at the peak magnetic field region and the lowest magnetic field region. In addition, the different quench disturbances are considered, such as (disturber length 0.01 m and disturber time 3 ms), (disturber length 1 m and disturber time 3 ms), and (disturber length 6 m and disturber time 100 ms). In all cases, the designed quench protection system is satisfied with the present design criteria concerning the hot spot temperature and the maximum helium pressure.
14 January 2025 in IEEE Transactions on Applied Superconductivity
The Central Solenoid Model Coil (CSMC) has been manufactured and assembled as part of the R&D projects for the China Fusion Engineering Test Reactor (CFETR), and will be tested at ASIPP. The measurement of the current sharing temperature (Tcs) of the coil at maximum operating current of 47.65 kA is proposed to assess the performance of the coil. The Tcs is defined as the point where the electric field locally reaches 10 μV/m. During the Tcs test, voltage taps measure the voltage of each cooling channel of the CSMC. Reliable thermal-hydraulic predictions are necessary to estimate the total voltage across a cooling channel when the local electric field is 10 μV/m, supporting the definition of the Tcs loop heating strategy. A predictive analysis of the Tcs tests for the CSMC is carried out, using the GANDALF code. An optimum heating scenario, based on the staircase strategy is developed to reduce cryogenic costs.
1 June 2012 in Journal of Superconductivity and Novel Magnetism
4 August 2021 in IEEE Transactions on Applied Superconductivity
SC200 cyclotron is a compact superconducting cyclotron for proton therapy developed by the ASIPP (Hefei, China)-JINR (Dubna, Russia) collaboration. In this paper, some beam dynamics simulations are done to evaluate the magnetic field of SC200 measured by mapping system. Magnetic field is optimized by shimming bars and coils to make sure beam can be accelerated to the entrance of extraction system. The optimization of isochronism of magnetic field, beam radial oscillation caused by imperfect first harmonic of magnetic field, magnetic vertical focusing force and radial magnetic field at median plane are presented. The tolerance of imperfect average magnetic field bump and radial magnetic field are studied by beam dynamics simulation.
8 July 2022 in IEEE Transactions on Applied Superconductivity
The SC200 superconducting cyclotron for hadron therapy is developed by collaboration of ASIPP (Hefei, China) and JINR (Dubna, Russia). However, the spatial shift of superconducting coils in a cyclotron will lead to the deviation of the magnetic from the requirements. It has an adverse effect on the acceleration of the beam. This article studies the effect of the tilt and horizontal offsets on the magnetic field in cyclotron. These two offsets can be detected by measuring the first harmonic of radial and axial components of the magnetic field on the midplane, respectively. Additionally, it is proved that the mixed offset of superconducting coils can be decomposed into these three fundamental offsets: vertical offset, tilt, and horizontal offset. Experimental data also indicate that this method can substantially reduce the first harmonic of the radial component of the magnetic field in the required area, which means that the superconducting coils are aligned in space.