In this paper, we propose an ultrathin and ultra-wideband metamaterial absorber based on periodically-arranged metallic square spirals. The design, characterization, and measurement of the proposal are presented as its equivalent circuit. The lumped elements of the equivalent circuit are extracted using a proposed algorithm based on the least-square method, which presents a straightforward and promising approach and shows a good matching with the electromagnetic simulation. The unit cell of the proposed structure has the square spiral mounted on an FR-4 substrate in front of a conductive plate. The simulated results show an absorptivity of more than 90% from 11.4 to 20.0 GHz, covering the Ku band for TM as well as TE polarization, and this broadband feature is confirmed by the experimental measurement. Furthermore, the proposed metamaterial absorber is λ/16:4 thick at the lowest frequency of absorption. The proposed metamaterial has proper response under oblique incidence from 0° to 50° and shows great performance with regard to the absorbers previously presented in the literature.
8 September 2008 in IET Microwaves, Antennas & Propagation
An experimental and numerical investigation about bandwidth enhancement of dielectric resonator antennas (DRAs) using multiple DRAs, arranged according to a ‘stacked’ configuration is reported. The antenna consists of two cylindrical discs of the dielectrics Cr0.75Fe1.25O3 (CRFO) and Fe0.5Cu0.75Ti0.75O3 (FCTO) stacked vertically, placed above a ground plane and excited by a coaxial probe. The lateral edge of the cylinder should be placed against the feed probe, which excites the ${\rm HEM}_{11{\rm \delta}}$ mode. The numerical procedure is performed through a software package based on the finite-element method. An excellent agreement between theoretical and experimental results is observed. The concept of increasing the bandwidth of the DRA by stacking is verified. For the first time, the temperature coefficient of resonant frequency (τf) was also measured for CRFO and FCTO ceramics.
The free space method allows nondestructive dielectric characterization of materials in a wide range of frequencies and temperatures, which is basic to several applications, as the development of radomes for aerospace proposals. This paper comprises the free space method from an initial procedure, the TRL calibration, to the permittivity calculation by the NRW method, including the software implemented and its practical validation with specific materials.
The sustainable use of water resources is of utmost importance given climatological changes and water scarcity, alongside the many socioeconomic factors that rely on clean water availability, such as food security. In this context, developing tools to minimize water waste in irrigation is paramount for sustainable food production. The evapotranspiration estimate is a tool to evaluate the water volume required to achieve optimal crop yield with the least amount of water waste. The Penman-Monteith equation is the gold standard for this task, despite it becoming inapplicable if any of its required climatological variables are missing. In this paper, we present a stochastic Bayesian framework to model the non-linear and non-stationary time series for the evapotranspiration estimate via Bayesian regression. We also leverage Bayesian networks and Bayesian inference to provide estimates for missing climatological data. Our obtained Bayesian regression equation achieves 0.087 mm · day for the RMSE metric, compared to the expected time series, with wind speed and net incident solar radiation as the main components. Lastly, we show that the evapotranspiration time series, with missing climatological data inferred by the Bayesian network, achieves an RMSE metric ranging from to 0.286 mm · day.
Software-Defined Radio (SDR) technology has already cleared up passive radar applications. Nevertheless, until now, no work has pointed how this flexible radio could fully and directly exploit pulsed radar signals. This paper aims at introducing this field of study presenting not only an SDR-based radar-detector but also how it could be conceived on a low power consumption device as a tablet, which would make convenient a passive network to identify and localize aircraft as a redundancy to the conventional air traffic control in adverse situations. After a brief approach of the main features of the equipment, as well as of the developed processing script, indoor experiments took place. Their results demonstrate that the processing of pulsed radar signal allows emitters to be identified when a local database is confronted. All this commitment has contributed to a greater proposal of an Electronic Intelligence (ELINT) or Electronic Support Measures (ESM) system embedded on a tablet, presenting characteristics of portability and furtiveness. This study is suggested for the areas of Software-Defined Radio, Electronic Warfare, Electromagnetic Devices and Radar Signal Processing.