29 November 2018 in IEEE Photonics Journal
24 July 2018 in IEEE Photonics Journal
We originally exploit the vortex beams with patterns of closed polygons [namely polygonal vortex beams (PVBs)] generated by a quasi-frequency-degenerate (QFD) Yb:CALGO laser resonator with astigmatic transformation. The PVBs with peculiar patterns of triangular, square, and parallelogram shapes carrying large orbital angular momentums (OAMs) are theoretically investigated and experimentally obtained in the vicinity of the SU(2) degenerate states of laser resonator. The PVBs in QFD states are distinct from the vortex beams with patterns of isolated spots arrays located on the triangle-, square-, and parallelogram-shaped routes [namely polygonal-spots-array vortex beams (PSA-VBs)] under normal SU(2) degenerate states. Beam profile shape of PVB or PSA-VB and OAM can be controlled by adjusting the cavity length and the position of pump spot. The simulated and experimental results validate the performance of our method to generate PVB, which is of great potential for developing applications such as particle trapping and manipulation.
31 August 2017 in Optics Express
Experimental amplification of 10-ns pulses to an energy of 12.2 J at the repetition rate of 1-10 Hz is reported from a diode-pumped room-temperature distributed active mirror amplifier chain (DAMAC) based on Nd:YAG slabs. Efficient power scaling at the optical-optical efficiency of 20.6% was achieved by suppressing the transverse parasitic oscillation with ASE absorbers. To the best of our knowledge, this is the first demonstration of a diode-pumped Nd:YAG active-mirror laser with nanosecond pulse energy beyond 10 joules. The verified DAMAC concept holds the promise of scaling the energy to a 50 J level and higher by adding 10-12 more pieces of active mirror in the chain.
3 March 2017 in Optics Letters
We demonstrated the active shaping for a solid-state amplifier with a high average gain of 39.2 dB. The average output power was 8.3 W with respect to the input power of 1 mW. A range of common and useful pulse shapes was generated at the final output. In addition, a very flat square pulse was produced with a root-mean-square less than 3% in amplitude. A numerical method was proposed to realize active shaping without an experimental test for the amplifier, showing great potential for the design of lasers with both high peak power () and a desired pulse shape.
11 September 2007 in Applied Physics B
1 March 2017 in Chinese Physics B
This paper presents an investigation of specific optical fiber core mode leakage behavior that occurs in high-power double-clad fiber lasers as a result of thermally-induced refractive index variations. A model of the power transfer between the core modes and the cladding modes during thermally-induced refractive index variations is established based on the mode coupling theory. The results of numerical simulations based on actual laser parameters are presented. Experimental measurements were also carried out, the results showed good agreement with the corresponding simulation results.