24 February 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A novel parameter identification method with dynamic impedance regulation is proposed to maintain constant output voltage of dynamic wireless power transfer (DWPT) system under varied loads and mutual inductance conditions. The resonant capacitor in the receiver side is replaced with a switched-controlled capacitor (SCC) structure, which enables the system to work under two operation modes. And then a comprehensive mathematical model is established according to these two modes to achieve the parameter identification. To avoid the deterioration of identification accuracy caused by the capacitors’ parameter drift, a dynamic impedance regulation method is introduced. The SCC is under dynamic closed-loop modulation to realize precious control of the equivalent capacitance of resonant capacitor in the receiver side. An experimental prototype is built in the laboratory, and the experimental results clearly demonstrate the accuracy of the proposed parameter identification.
9 November 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Zero-phase-angle (ZPA) operation is considered as a method to minimize the volt-ampere (VA) ratings and maximize transfer power to the load in the inductive power transfer (IPT) system. However, the ZPA operating prerequisite is quite sensitive to the variation of parameters such as IPT system coupling coefficient and load conditions. A parallel-series/series (PS/S) current-fed IPT system with a new variable capacitors (VCs) structure is proposed to achieve ZPA operation and constant output voltage at fixed frequency. The detailed analysis and mathematical model of the variable capacitors network are reported. The proposed VCs structures in PS/S current-fed IPT system are discussed, analyzed and compared with existing competitive topologies in the literature. The experimental results obtained from 65-W lab-prototypes are demonstrated to verify the analysis and performance.