8 November 2022 in IEEE Sensors Journal
Flexible tactile sensors have promising applications at the field of intelligent robotics. However, manufacturing flexible tactile sensors with excellent stability and high sensitivity remain a great challenge. In the present work, polyvinylidene fluoride (PVDF)-based nanofibers are prepared by electrospinning loaded with Fe 3 O 4 nanoparticles (NPs). X-ray diffraction (XRD) and attenuated total reflection fourier transform infrared spectroscope (ATR-FTIR) results indicate that the addition of Fe 3 O 4 NPs promotes the generation of β-phase in PVDF polymer, which greatly improves piezoelectric properties of composite nanofibers. Simultaneously, a flexible piezoelectric tactile sensor with cilia-inspired structures (PTSCS) based on PVDF/Fe 3 O 4 nanofibers is proposed, which consists of the substrate with cilia structures, Ag electrodes, composite nanofiber membrane and nanofiber protective layer. The PTSCS demonstrates a higher output voltage compared to sensors with bump and planar structures, which also exhibits high robustness, with a stable output after 30000 cycles of vibration testing. More importantly, the PTSCS demonstrates superior performance in recognizing surface texture and temperature of objects. The flexible PTSCS has potential use in areas such as intelligent soft robotics and material recognition.
1 September 2021 in Review of Scientific Instruments
Based on the tactile mechanism of human fingertips, a bionic tactile sensor fabricated from polyvinylidene fluoride piezoelectric film is proposed, which can identify the surface softness, viscoelasticity, thermal conductivity, and texture roughness of the object. The tactile sensor is mounted on the fingertip of the bionic manipulator, which obtains the surface features by touching and sliding the object. The time-domain features of the output signal are used for preliminarily discriminating the softness, viscoelasticity, and heat conduction of the object. Finally, based on the Back Propagation and the Particle Swarm Optimization-Back Propagation neural network algorithm, the recognition experiment of texture roughness is carried out using the PSO algorithm to improve the BP neural network so that the optimized BP algorithm has a higher convergence accuracy. The results show that the PSO-BP algorithm achieved the highest accuracy of 98% for identifying samples with different roughnesses and the average recognition achieved an accuracy of 94%. The bionic piezoelectric tactile sensor proposed in this paper has a good application development prospect in recognizing the surface features of objects and intelligent robots.
1 September 2021 in Review of Scientific Instruments
A new type of Ag/AgCl electrode as a marine electric field sensor is prepared using electrospray. The surface of the electrode is porous, and the particle size of AgCl is small and uniform with an average particle size of 1.43 µm, which accelerated the speed of the oxidation–reduction reactions. Therefore, the electrode with large specific surface area has high stability and low noise. The impedance, sensitivity, self-noise, and stability of the electrode are measured to study the electrochemical performance of the electrode. The impedance of the electrode is 7.9 Ω, and the electrode shows resistance characteristics, meaning that the electrode can well receive the weak ocean electric field signals with low signal distortion. The sensitivity experiment result shows that the electrode can well restore the sinusoidal electric field signal of 1 Hz (10 mV). The voltage drift is less than 5 µV/100 h, the self-potential is between −51 and 56 µV, and the self-noise of the electrode is 2.48 nV @ 1 Hz. The AgCl layer on the surface of the electrode is porous and thick, and the particle size of AgCl is small and uniform. This makes the electrode have excellent electrochemical performance. All the experimental results show that the electrode has ultra-low noise and excellent response to low frequency weak electric field signals. The electrode is of great significance to the exploitation of marine resources as the marine electric field sensor.
7 August 2023 in IEEE Transactions on Instrumentation and Measurement
Accurate measurement of rock electrical properties plays a crucial role in resource exploration and geological exploration. But there are kinds of problems with traditional rock measuring electrodes including high contact resistance, high electrode polarization, low stability and so on. To solve these problems, we designed and fabricated an all solid-state electrode with low contact resistance, low polarizability and high stability. The electrode consists of silver (Ag) and silver chloride (AgCl). To reduce the contact resistance between the electrode and rocks, the electrode was fabricated by powder sintering and repressing, and a scanning electron microscope (SEM) showed that the surface of the electrodes was multi-holes and coarse which is beneficial to reduce contact resistance. In addition, the Ag and AgCl mixture was prepared in the polyvinyl pyrrolidone (PVP) gel, which reduced the particle size of the AgCl and led to a low polarization degree of the electrode. An experimental system for evaluation and characterization was designed to measure the basic characteristics, stability, contact resistance and polarization of the electrodes, which are essential features and will affect the accuracy of electrical measurement. And the copper (Cu) electrode is the reference electrode. The results showed that the maximum resistance of the electrode pair is lower than 0.13 Ω. Through the measurements of core samples with different moisture content, contact resistances are lower than the Cu electrodes by at least 74%, and the accuracy of resistivity measurement is increased by more than 25%. The polarization degree of the electrode is reduced by more than 65%. After multiple measurements, the electrodes still maintain great performance and the uncertainty in measurement keeps at a low level. These characteristics will improve the measuring accuracy of the core electrical properties remarkably. Therefore, this research will promote the study of petrophysical and the exploration of mineral resources.
15 April 2024 in IEEE Transactions on Instrumentation and Measurement
In the process of developing energetic materials, it is necessary to evaluate the explosive power of energetic materials, especially the destructive effect of shock waves. Overpressure measurement is an important method to evaluate the power of shock waves. This article proposes an overpressure sensor based on BiScO3–PbTiO3 (BSPT) piezoelectric ceramic nanofibers (NFs). The BSPT NF sensor has the characteristics of high-temperature and high-pressure impact resistance and can be used for shock wave measurement. Experimental results show that the BSPT NF sensor has high-temperature stability; the sensitivity remains above 5.4 V/N at 60 °C–220 °C, and its sensitivity is still higher than 3.7 V/N at 240 °C. In addition, the BSPT NFs overpressure sensor has excellent overload resistance, measuring up to 65 kPa of overpressure without any damage when the trinitrotoluene (TNT) equivalent is 9.6 kg and the sensor is 4 m away from the explosion center. The results indicate that the BSPT NFs overpressure sensor has great application potential in the field of explosion testing.