3 April 2019 in Journal of Petroleum Exploration and Production Technology
In gas flooding, one of the major problems in implementing foam as a gas mobility control method is the stability of foam. Foam booster when blended with surfactant could improve the foam stability. However, the influence of foam booster on the conventional foam stability and foamability at elevated temperature and presence of inorganic electrolytes is not yet explicit due to limited studies in this area. The objective of the present work was to evaluate the influence of a foam booster on aqueous solution stability, foamability and foam stability when blended with surfactant at different ratios at an elevated temperature in the presence of brine composed of monovalent and divalent ions. Three different surfactants AOS C14–16 (alpha-olefin sulfonate), SDS (sodium dodecyl sulfate) and a locally manufactured surfactant ‘Surf X’ were chosen as base surfactants. An amphoteric surfactant lauryl betaine was chosen as a foam booster in this study. The aqueous solution stability was visually evaluated, whereas the bulk foam experiments were conducted in a commercial foam analyzer apparatus. It was found that not all solutions were stable when lauryl betaine was blended. Lauryl betaine did not improve the foam generation time. The foam stability was improved; however, not all solutions were able to generate stable foam. ‘Surf X’ was able to generate more stable foam as compared to AOS and when blended with lauryl betaine it also required less amount of lauryl betaine to generate stable foam.
4 March 2019 in International Journal of Chemical Engineering
The higher cost of chemical surfactants has been one of the main reasons for their limited used in enhanced oil recovery (EOR) process. Hence, the reason for developing lignin-based surfactant is to lower the cost of chemicals as it does not tie to the price of crude oil as compared to petroleum-based surfactants. Besides, lignin is biodegradable and easily extracted from plant waste. The objectives of this study are to determine the formulations of the lignin-based surfactant for EOR applications and to determine the oil recovery performance of the formulated surfactants through surfactant flooding. The lignin-based surfactants were formulated by mixing the lignin with the amine (polyacrylamide or hexamethylenetetramine) and the surfactant sodium dodecylbenzenesulfonate in a 20,000 ppm NaCl brine. Interfacial tension (IFT) of the formulated lignin-based surfactant is measured at ambient temperature using the spinning drop method. The displacement experiments were conducted at room temperature in glass beads pack holders filled with glass beads, saturated with paraffin and brine. The results of the study showed that the best formulation of lignin-based surfactant is using hexamethylenetetramine as the amine, lignin, and sodium dodecylbenzenesulfonate at 2% total active concentration. The oil recovery and interfacial tension using the lignin amine system is comparable with the commercial petroleum sulfonate system.
9 October 2020 in Journal of Nanomaterials
Previously, condensate banking removal in gas reservoir is mitigated using chemical treatments to alter the wettability of the near-wellbore region. However, this technique performed unsatisfactorily as it reduces the surface free energy and affects the gas relative permeability negatively. Hence, alternative surface-modified nanoparticles using fluorine-based chemicals were developed as wettability alteration agents since fluorine exhibits a high degree of liquid repellency and nanoparticles introduce high surface roughness. The newly synthesized surface-modified nanoparticles were characterized using FTIR, DLS, FESEM, and TGA. FTIR results highlight the characteristic absorption of Si-O-C group at peak 1105 and 1106 cm-1 in both fluoroalkanoic acids, demonstrating that fluorochemical molecules have been successfully coated onto silica nanoparticles. Nanoparticle sizes measured by DLS reported higher value than FESEM due to agglomeration, and the DLS measurement was done in hydrodynamic conditions. TGA analysis reveals decomposition at temperature between 100 and 150°C, indicating that these surface-modified nanoparticles can be utilized in an environment below 100°C. Higher decomposition was perceived on PFNA-modified nanoparticles as a thicker coating of PFNA is shrouding the silica nanoparticles compared to PFOA. Implications of the results will path the way for future research direction in using fluorine-based surface-modified nanoparticles as wettability alteration agents.
1 May 2021 in IOP Conference Series: Earth and Environmental Science
The adsorption of surfactants from aqueous solutions in porous media is essential in enhanced oil recovery (EOR) from oil reservoirs. Surfactant loss that is due to adsorption by the reservoir rocks weakens the efficiency of the chemical slurry that is injected and decreases the oil-water interfacial tension (IFT). One of the ways to reduce the reduction is by using a sacrificial agent. This project will focus on utilizing the lignosulfonate (LS) from coconut husk as a sacrificial agent to reduce the surfactant adsorption. Lignin was extracted from coconut husk before sulfonated using sodium sulphite, Na 2SO 3 to form lignosulfonate. Fourier transform infrared (FTIR) spectroscopy was used to characterize the lignin and lignosulfonate and compare them with the commercial product. The batch experiment then conducted using a clay mineral of illite as the adsorbent. Two types of surfactants were studied; anionic (Sodium Dodecyl Sulfate-SDS) and non-ionic (4-octylphenol polyethoxylate-TX100). The amount of adsorbed surfactant was determined by measuring the surfactant critical micelle concentration (CMC) before and after the adsorption tests. The result in the batch experiment shows that LS reduced the surfactant adsorption on illite by about 54.2% for SDS and 42.6% for TX100. This showed that lignosulfonate has the potential as a sacrificial agent to minimize the surfactant adsorption, and agriculture waste like coconut husk can be utilized for this purpose.
21 March 2012 in Jurnal Teknologi (Sciences & Engineering)
Application of ultrasonic waves as an unconventional enhanced oil recovery method has been a point of interest for some decades. However, despite number of researches on ultrasonic applications, the influencing mechanisms are not fully comprehended. The aim of this study is to experimentally investigate the effects of ultrasonic waves on recovery of waterflooding and to discuss the mechanisms involved. Series of straight (normal) and ultrasonic stimulated waterflooding experiments were conducted on a long unconsolidated sand pack using ultrasonic transducers. Kerosene, vaseline and engine oil were used as non wet phase in the system. Moreover, a series of supplementary experiments were conducted using ultrasonic bath in order to enhance the understanding about contributing mechanisms. 2–16% increase in the recovery of waterflooding was observed. Emulsification, viscosity reduction and cavitation were identified as contributing mechanisms. Key words: Ultrasonic waves; enhanced oil recovery; waterflooding; emulsification
7 June 2021 in Science Proceedings Series
A novel fluorinated silica nanoparticles were synthesized using 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS17) and further characterized to evaluate the wettability alteration capability. Previous research (1, 2) has utilized fluoroalkanoic acids as the coating agent. First, the in-situ functionalization method employs tetraethoxysilane (TEOS) as the silica precursor and water-soluble amine as the catalyst. It is then further functionalized with 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (FAS17) with ethanol to attain the novel fluorinated silica nanoparticles. The preliminary characterization from FTIR analysis indicated that the in-situ functionalization was successfully applied. The new bonding formation with fluorine attachment on the novel fluorinated silica nanoparticles is capable to alter the wettability of the solid surface, exhibiting self-cleaning properties.