Anna Munzer

Anna Munzer

Auto-generated profile, based on publicly available information

Anna Munzer

Fraunhofer Institute for Solar Energy Systems ISE, Freiburg, Germany

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2020 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
PBPuzant Baliozian
Puzant Baliozian
MAMohammad Al-Akash
Mohammad Al-Akash
ELElmar Lohmuller
Elmar Lohmuller
ARArmin Richter
Armin Richter
TFTobias Fellmeth
Tobias Fellmeth
RPRalf Preu
Ralf Preu

10 August 2021 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
AMAnna Munzer
Anna Munzer
PBPuzant Baliozian
Puzant Baliozian
ASAnamaria Steinmetz
Anamaria Steinmetz
TGTorsten Geipel
Torsten Geipel
SPSebastian Pingel
Sebastian Pingel
RPRalf Preu
Ralf Preu
We investigate different postseparation process routes for silicon heterojunction (SHJ) half solar cells, separated by thermal laser separation. SHJ half cells with and without aluminum oxide (Al 2 O 3 ) deposition as edge passivation layer undergo different annealing processes, including i) a hotplate; ii) an inline oven; and iii) an ultrafast light soaking process. SHJ half cells with an initial efficiency of 21.7% reach 21.9% after Al 2 O 3 deposition and inline oven annealing (pseudo fill factor, pFF , increase of 0.3% abs and series resistance R S decrease by −0.05 Ωcm 2 ). The light soaking process is known to lead to improved surface passivation and carrier transport for SHJ cells. For light soaking processed SHJ half cells, an 21.9% efficiency is obtained ( R S reduction by −0.13 Ωcm 2 and open-circuit voltage V OC increase by +2 mV compared to the initial half cell). By combining Al 2 O 3 deposition and subsequent light soaking, SHJ half cells reach 22.1% efficiency, resulting from the combined benefits for pFF , R S , and V OC of the two processes. No additional thermal annealing of the Al 2 O 3 layer is necessary, proving that the light soaking process is sufficient to activate the Al 2 O 3 passivation. This allows for a two-step postseparation process sequence, resulting in SHJ half cells featuring similar efficiencies to light soaking processed full cells. SHJ half cells, integrated into one-cell modules after Al 2 O 3 deposition and light soaking, show an efficiency advantage of +0.3% abs in comparison to modules with untreated half cells. Thus, we demonstrate the possibility of compensating separation losses for SHJ half cells and the transferability of the improvements to module level.

15 January 2021 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
PBPuzant Baliozian
Puzant Baliozian
AMAnna Munzer
Anna Munzer
ELElmar Lohmuller
Elmar Lohmuller
ANAathira Nair
Aathira Nair
TFTobias Fellmeth
Tobias Fellmeth
RPRalf Preu
Ralf Preu
This article investigates thermal laser separation (TLS) on p-type Czochralski-grown silicon (Cz-Si) passivated emitter and rear cells (PERC) and n-type Cz-Si heterojunction (SHJ) solar cells. The TLS comprises of two laser-based processes: the crack initiation by a scribe laser and the crack propagation by a cleave process leading to separated cells with smooth edge surfaces. The sole impact of the cleave process on the cells' passivation layers is examined by performing it without the initial scribe, not separating the samples. By means of photoluminescence imaging, different cleave laser powers PC on passivated PERC and SHJ cell precursors are investigated, and the optimum PC values are then chosen for the processing of metallized and fired host cells with half cell and shingle cell layouts. Both, the cleave process as well as the complete TLS process are then separately performed in order to investigate the effect of each individual process by SunsVOC measurements taken before and after processing. For monofacial PERC cells, a drop in pseudofill factor ΔpFF = - 0.3%abs is recorded after TLS of the host cell into five shingle cells with 31.35 mm cell width. The effect on bifacial SHJ cells is stronger with ΔpFF = - 2.1%abs. Thereby, the cleave process itself does not induce significant losses in the cell performance for both cell types. The main losses are attributed to the recombination at the newly created unpassivated edges after complete TLS.

15 July 2025 in Thin Solid Films
Verified
Journal Article
Open access
AMA. Münzer
A. Münzer
MWM. Weittenhiller
M. Weittenhiller
MBM. Bivour
M. Bivour
FMF. Meyer
F. Meyer
SGS.W. Glunz
S.W. Glunz

1 July 2026 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
AMA. Münzer
A. Münzer
MWM. Weittenhiller
M. Weittenhiller
MBM. Bivour
M. Bivour
SGS. W. Glunz
S. W. Glunz
FMF. Meyer
F. Meyer