School of Energy and Environmental Engineering, Hebei University of Technology, 5340# Xiping Road, Shuangkou Town, Beichen District, Tianjin 300401, China
Auto-generated profile, based on publicly available information
Yating Wang
School of Energy and Environmental Engineering, Hebei University of Technology, 5340# Xiping Road, Shuangkou Town, Beichen District, Tianjin 300401, China
Selective catalytic reduction of NOx with NH3 (NH3-SCR) has been widely investigated to reduce NOx emissions from combustion processes, which cause environmental challenges. However, most of the current work on NOx reduction has focused on using feed gas without CO2 or containing small amounts of CO2. In the future, oxy-fuel combustion will play an important role for power generation, and this process generates high concentrations of CO2 in flue gas. Therefore, studies on the SCR process under concentrated CO2 atmosphere conditions are important for future SCR deployment in oxy-fuel combustion processes. In this work, Mn- and Ce-based catalysts using activated carbon as support were used to investigate the effect of CO2 on NO conversion. A N2 atmosphere was used for comparison. Different process conditions such as temperature, SO2 concentration, H2O content in the feed gas and space velocity were studied. Under Mn-Ce/AC conditions, the results suggested that Mn metal could reduce the inhibition effect of CO2 on the NO conversion, while Ce metal increased the inhibition effect of CO2. High space velocity also resulted in a reduction of CO2 inhibition on the NO conversion, although the overall performance of SCR was greatly reduced at high space velocity. Future investigations to design novel Mn-based catalysts are suggested to enhance the SCR performance under concentrated CO2 atmosphere conditions.
An experimental study on a plate gravity heat pipe (PGHP) with inner cavity size of length 100 mm (X), width 2.5 mm (Y), and height 210 mm (Z) with acetone as the working fluid was carried out. The effects of heating power inputs (80–180 W) and fluid filling ratios (25%, 48%, and 55%) on the start-up temperature, start-up time, temperature difference, and relative thermal resistance on the Z-axis of the PGHP in a vacuum of 1 × 10−3 Pa were studied at unsteady state. Furthermore, the gas-liquid two-phase behavior of the interior working fluid of PGHP, and the coupling heat transfer behavior of the boiling liquid and the condensate were observed through a visualizable window under different experimental conditions. The results show that, with the increase of heating power input, the start-up temperature of the PGHP increases and the start-up time is shortened. The start-up temperature of the PGHP was around 33 °C and the start-up time was about 320 s at the heating power input of 120 W and working fluid filling ratio of 55%. The relative thermal resistance and the temperature difference on the Z-axis of the PGHP increase firstly and then decrease with the increase of heating power input at unsteady state. The complex gas-liquid two-phase behavior of the PGHP mainly includes: the formation and growth of bubbles, the merging and break up of bubbles, and the coupling heat transfer between boiling liquid and condensate, which demonstrate that the novel SVPGHP can be used to effectively study the heat transfer process of PGHP.
Mn-Ce/FA (M) and Mn-Ce/FA-TiO2 (M), using fly ash (FA) with and without TiO2 as the carriers, were prepared by an integral molding technique. With the increase of TiO2 content, the rates of NO conversion and denitration of Mn-Ce/FA-TiO2 (M) increased, and the NO2 and N2O formation rates decreased. It is found that TiO2 could effectively inhibit the excessive oxidation of NO and the generation of N2O. The effects of space velocity, oxygen concentration and ammonia nitrogen ratio on three types of nitrogen oxides (NO, NO2, N2O) and denitration rates of the Mn-Ce/FA (M) and Mn-Ce/FA-30%TiO2 (M) were further investigated. In addition, it is demonstrated that Mn-Ce/FA (M) and Mn-Ce/FA-30%TiO2 (M) were more suitable to be used in the environment of low sulfur and less water.