Jose Manuel Perlado

Jose Manuel Perlado

Auto-generated profile, based on publicly available information

Jose Manuel Perlado

Instituto Fusión Nuclear "Guillermo Velarde", Universidad Politecnica Madrid, UPM, Spain

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2020 in Matter and Radiation at Extremes
Verified
Journal Article
Open access
PDF file
RGRaquel González-Arrabal
Raquel González-Arrabal
ARA. Rivera
A. Rivera
JPJ. M. Perlado
J. M. Perlado
The high-power laser energy research (HiPER) project was a European project for demonstrating the feasibility of inertial fusion energy based on using direct-drive targets in a shock ignition scheme using a drywall evacuated chamber. HiPER was intended to drive the transition from a scientific proof of principle to a demonstration power plant in Europe. The project was divided into three realistic scenarios (Experimental, Prototype, and Demo) to help identify open problems and select appropriate technologies to solve them. One of the problems identified was the lack of appropriate plasma-facing materials (PFMs) for the reaction chamber. Therefore, a major challenge was to develop radiation-resistant materials able to withstand the large thermal loads and radiation in these reactors. In this paper, we describe the main threats that coarse-grained W would face in the diverse HiPER scenarios. Based on purely thermomechanical considerations, the W lifetimes for the HiPER Prototype and Demo scenarios are limited by fatigue to 14 000 h and 28 h, respectively. The combined effects of thermal load and atomistic damage significantly reduce these lifetimes to just ∼1000 shots for the Experimental scenario and a few minutes and seconds for the Prototype and Demo scenarios, respectively. Thus, coarse-grained W is not an appropriate PFM for the Prototype or Demo scenarios. Therefore, alternatives to this material need to be identified. Here, we review some of the different approaches that are being investigated, highlight the work done to characterize these new materials, and suggest further experiments.

24 November 2014 in Nuclear Fusion
Verified
Journal Article
Open access
APA.R. Páramo
A.R. Páramo
FSF. Sordo
F. Sordo
DGDavid Garoz Gomez
David Garoz Gomez
BGB. Le Garrec
B. Le Garrec
JPJ.M. Perlado
J.M. Perlado
ARA. Rivera
A. Rivera

10 February 2011
Verified
Conference Paper
Open access
PDF file
ARAntonio C Rivera
Antonio C Rivera
DGDavid Garoz Gomez
David Garoz Gomez
RJR Juarez
R Juarez
JAJ Alvarez
J Alvarez
RGR Gonzalezarrabal
R Gonzalezarrabal
JPJ M Perlado
J M Perlado
The goal of the European laser fusion project, is to build an engineering facility for repetitive laser operation (HiPER 4a) and later a fusion reactor (HiPER 4b). A key aspect for laser fusion energy is the final optics. At the moment, it is based on silica transmission lenses located 8 m away from the chamber center. Lens lifetime depends on the irradiation conditions. We have used a 48 MJ shock ignition target for calculations. We have studied the thermo-mechanical effects of ions and X-rays on the lenses. Ions lead to lens melting and must therefore be mitigated. On the other hand, X-rays (~1% of the energy) does not produce either a significant temperature rise or detrimental stresses. Finally, we calculated the neutron flux and gamma dose rate on the lenses. Next, based on a simple model we studied the formation of color centers in the sample, which lead to optical absorption. Calculations show that simultaneous neutron and gamma irradiation does not significantly increase the optical absorption during the expected lifetime of the HiPER 4a facility. Under severe conditions (HiPER 4b), operation above 800 K or lens refreshing by thermal annealing treatments seem to assure adequate behavior.

1 May 2002 in Fusion Science and Technology
Verified
Journal Article
Closed access
MVMarta Velarde
Marta Velarde
JPJ. Manuel Perlado
J. Manuel Perlado
LSLuis A. Sedano
Luis A. Sedano
The environmental impact of the nuclear fusion energy is expected to be very small. It will depend mainly on the reactor materials, and not on the own process of energy production, contrarily to the fission technologies used today. The evaluation of the radiological environmental impact of tritium emission (routine, accidental) requires the use of mathematical and statistical models of dispersion to the biosphere. In the inertial fusion reactors (IFE) design, the coolant is a production source of tritium. We have used inventories of tritium from IFE such as HYLIFE II, OSIRIS, SOMBRERO and CASCADE. The two chemical forms of tritium in the environment contribute in a different way to the Committed Effective Dose Equivalent (50-CEDE). As much as 40% HTO and 98% HT contribute from ingestion of foods. The HTO presents a much higher percentage in the internal radiation for inhalation and absorption for the skin than the HT. The maximum values are in the near ranges to the reactor about 100–400 m of distance of the emission source. In HT emissions the contribution to the total effective dose by ingestion and re-emission is important. The atmospheric and geometric conditions are a decisive factor in the contribution levels from the tritium to the dose. The wet and dry depositions as well as the classes of stability and the rain intensity factor vary these levels increasing or diminishing the values of the dose.

1 October 2013 in Fusion Engineering and Design
Verified
Journal Article
Open access
RJRafael Juárez
Rafael Juárez
JSJavier Sanz
Javier Sanz
ALA.J. Lopez-Revelles
A.J. Lopez-Revelles
JPJosé Manuel Perlado
José Manuel Perlado
The HiPER reactor design is exploring different reaction chambers. In this study, we tackle the neutronicsand activation studies of a preliminary reaction chamber based in the following technologies: unpro-tected dry wall for the First Wall, self-cooled lead lithium blanket, and independent low activation steelVacuum Vessel. The most critical free parameter in this stage is the blanket thickness, as a function ofthe6Li enrichment. After a parametric study, we select for study both a ?thin? and ?thick? blanket, with?high? and ?low?6Li enrichment respectively, to reach a TBR = 1.1. To help to make a choice, we com-pute, for both blanket options, in addition to the TBR, the energy amplification factor, the tritium partialpressure, the203Hg and210Po total activity in the LiPb loop, and the Vacuum Vessel thickness requiredto guarantee the reweldability during its lifetime. The thin blanket shows a superior performance in thesafety related issues and structural viability, but it operates at higher6Li enrichment. It is selected forfurther improvements. The Vacuum Vessel shows to be unviable in both cases, with the thickness varyingbetween 39 and 52 cm. Further chamber modifications, such as the introduction of a neutron reflector,are required to exploit the benefits of the thin blanket with a reasonable Vacuum Vessel

1 April 2017 in Fusion Engineering and Design
Verified
Journal Article
Closed access
FTFrancisco Tabares
Francisco Tabares
JPJose Manuel Perlado
Jose Manuel Perlado