28 November 2011 in IEEE Transactions on Electron Devices
We have fabricated thin-film transistors (TFTs) and liquid-crystal displays (LCDs) with monolithic drivers on glass substrates and achieved ultralow power consumption by operating with a low power-supply voltage at 3 V. The gate insulator of the TFTs has a stack structure with an ultrathin interfacial SiO 2 layer formed by nitric acid oxidation of silicon and a 40-nm-thick SiO 2 layer formed by plasma-enhanced chemical vapor deposition. Owing to the TFTs with the thin gate insulator, the driving circuits of the LCDs can be operated at a supply voltage of 1.5 V, which is much lower than that of conventional LCDs of 10-15 V.
1 February 2021 in Journal of the Electrochemical Society
Composites of flake-shaped Si nanopowder from swarf treated as an industrial waste and ultrathin graphite sheets (GSs) (Si:C = 5:1 wt) are used in Li-ion battery electrodes. Si nanopowder is dispersed and wrapped between GSs fabricated from expanded graphite. The delithiation capacity of the Si/GS composite electrode during 300 cycles is 1.69 ∼ 0.83 mAh cm−2 (0.5 C), while that of the electrode with C-coated Si nanopowder (Si:C = 10:1 wt) fabricated in C2H4 is 1.55 ∼ 0.72 mAh cm−2. The series resistances (Rs) for the Si/GS electrode are a half and two-thirds of those for the C-coated Si electrode at the 6th and 300th cycles, respectively. The charge transfer resistance (Rct) for the Si/GS electrode is two-thirds of that for the C-coated Si electrode at the 300th cycle. GS bridges are formed across cracks, and suppress cracking and peeling-off of Si. Agglomerated GSs wrap Si/GS composites, and work as stable frameworks that secure electrolyte paths and buffer spaces for Si volume change. In the C-coated Si electrodes, Si frameworks fuse after the 300th cycle, leading to low delithiation capacities. The delithiation capacity of 4 mAh cm−2 for more than 75 cycles is achieved by the Si/GS electrode at the current density of 5 mA cm−2 with delithiation limitation at 1200 mAh g−1.
1 March 2013 in Applied Surface Science
21 May 2014 in ECS Journal of Solid State Science and Technology
1 November 2007 in Surface Science
25 April 2011 in ECS Transactions
We have succeeded in fabrication of sub-micrometer TFT which can be operated at 1.5 V, having stack gate oxide structure formed by the nitric acid oxidation of Si (NAOS) method. The ultrathin NAOS SiO2 layer possesses a low leakage current density, and consequently, the gate oxide layer afterward deposited by the CVD method can be made as thin as 20 nm. Because of the thin gate oxide, miniaturization of TFT with the 0.6 µm gate length is achieved. The operation voltage of the TFTs can be set at as low as 1.5 V because of the low threshold voltages (i.e., −0.5 V for P-ch TFT and 0.5 V for N-ch TFT). The sub-threshold swing value is ~80 mV/decade and the on/off ratio is ~109 for both the P-ch and N-ch TFTs. The channel mobility is ~100 cm2/V•s for the P-ch TFT and ~200 cm2/V•s for the N-ch TFT.