13 December 2021 in Nuclear Fusion
As part of ITPA-Integrated Operational Scenario activities, this contribution reviews recent experimental characterizations of radio-frequency (RF)-induced scrape-off layer (SOL) modifications of various tokamaks worldwide and of the LArge Plasma Device at UCLA. The phenomenology, as observed using a large variety of measurement techniques, is consistent with expectations from RF sheath rectification. Emphasis is then put on the complex three-dimensional (3D) spatial patterns of the RF–SOL interaction, in relation to the magnetic topology and the spatial distribution of RF currents over the metallic structures surrounding the RF wave launchers. Dependence on the local plasma parameters in the antenna vicinity is also briefly addressed. The final part discusses implications for future devices.
26 July 2018 in Nuclear Fusion
11 April 2018 in Nuclear Fusion
12 August 2021 in Nuclear Fusion
1 May 2018 in Plasma Sources Science and Technology
The Proto-MPEX helicon source has been operating in a high electron density ‘helicon-mode’. Establishing plasma densities and magnetic field strengths under the antenna that allow for the formation of normal modes of the fast-wave are believed to be responsible for the ‘helicon-mode’. A 2D finite-element full-wave model of the helicon antenna on Proto-MPEX is used to identify the fast-wave normal modes responsible for the steady-state electron density profile produced by the source. We also show through the simulation that in the regions of operation in which core power deposition is maximum the slow-wave does not deposit significant power besides directly under the antenna. In the case of a simulation where a normal mode is not excited significant edge power is deposited in the mirror region.
24 March 2025 in Journal of Plasma Physics
Transport characteristics and predicted confinement are shown for the Infinity Two fusion pilot plant baseline plasma physics design, a high field stellarator concept developed using modern optimization techniques. Transport predictions are made using high-fidelity nonlinear gyrokinetic turbulence simulations along with drift kinetic neoclassical simulations. A pellet-fuelled scenario is proposed that enables supporting an edge density gradient to substantially reduce ion temperature gradient turbulence. Trapped electron mode turbulence is minimized through the quasi-isodynamic configuration that has been optimized with maximum-J. A baseline operating point with deuterium–tritium fusion power of $P_{{fus,DT}}=800$ MW with high fusion gain $Q_{{fus}}=40$ is demonstrated, respecting the Sudo density limit and magnetohydrodynamic stability limits. Additional higher power operating points are also predicted, including a fully ignited ( $Q_{{fus}}=\infty$ ) case with $P_{{fus,DT}}=1.5$ GW. Pellet ablation calculations indicate it is plausible to fuel and sustain the desired density profile. Impurity transport calculations indicate that turbulent fluxes dominate neoclassical fluxes deep into the core, and it is predicted that impurity peaking will be smaller than assumed in the transport simulations. A path to access the large radiation fraction needed to satisfy exhaust requirements while sustaining core performance is also discussed.